Gesture controlled robotic arm using leap motion
Gesture controlled robotic arm using leap motion (Lebotica 1.0) is a non-prosthetic robotic arm which mimics the movement of the real human arm including indiviual finger movements and rotational wrist movement. The applications include any pick and place environment, hazardous environment and harsh
Project Title
Gesture controlled robotic arm using leap motion
Project Area of Specialization
Project Summary
Gesture controlled robotic arm using leap motion (Lebotica 1.0) is a non-prosthetic robotic arm which mimics the movement of the real human arm including indiviual finger movements and rotational wrist movement. The applications include any pick and place environment, hazardous environment and harsh/radioactive environment where real human arm can be damaged.
Project Objectives
Objective of this project is to built such a non-prosthetic robotic arm that copies the movements of real arm to provide assistant and help to the people working in harsh/radioactive and hazardous environment.
Project Implementation Method
A leap motion sensor(include cameras and sensor to detect movement of real hand at real time-it takes 200 frames per second) is used to control the servo motors which are connected to the fingers through artificial tendon network to control the movement of robotic arm along with the a servo motor attached for the wrist movement.
Benefits of the Project
- improved working environment
- increased profitability
- longer working hours
- utilization in radioactive environment
- usage in hazardous environment
Technical Details of Final Deliverable
servo motor attached inside the robotic arm having fishing braided lines as artificial tendon network which will contract and expand the movement of fingers. The whole system will be controlled through Leap Motion sensor and the controller is Arduino Uno
Final Deliverable of the Project
Type of Industry
Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| arduino uno | Equipment | 1 | 750 | 750 |
| servo motor | Equipment | 6 | 700 | 4200 |
| leap motion | Equipment | 1 | 19800 | 19800 |
| 3d printing | Equipment | 1 | 34600 | 34600 |
| Total in (Rs) | 59350 |
If you need this project, please contact me on contact@adikhanofficial.com
Automated Lawn Mower
Existing lawn cutting machines suffer from more than one of the following; high initial co...
Development and Analysis of a single leg for a Quadruped Robot
Problem Statement: Land animals running at high speeds need high accelerations and...
Power Factor Improvement using Thyristor Switch Reactance
Our project is based on Power Electronics. In this project we are improving the power fact...
Design and assembly of a multiplex miniature concentrated solar power...
The limited supply of fossil fuels such as coal, petroleum products like hydrocarbon resou...
Kindergarten Learning School
With an ever-evolving technology and constant process of automation taking place, things h...