Fuel Injector and Ignition Coil Tester
This Project is for testing the Fuel injectors, Ignition Coils and the spark plugs which are the most common reasons of the knocking of the cars. The fuel injectors will test the fuel levels emitted by each injector in the chamber. The ignition coil tester will test the resistance and current o
Project Title
Fuel Injector and Ignition Coil Tester
Project Area of Specialization
Project Summary
This Project is for testing the Fuel injectors, Ignition Coils and the spark plugs which are the most common reasons of the knocking of the cars. The fuel injectors will test the fuel levels emitted by each injector in the chamber. The ignition coil tester will test the resistance and current of the ignition coil. Spark plug tester will test the resistance of the spark plug.
Project Objectives
This project is aimed to develop a device that will address the needs of testing coil on plug(ignition coils) , spark plugs and fuel injectors. The literacy rate of local mechanics of Pakistan is very low. They are unable to use the diagnostic tools like Automotive scope, WYZE and Paddle probes,Picoscope, SNAPON etc because no one can operate these tools without proper training. So this device will meet the needs of local mechanics and also create mass know how about automotive technology at national level.
Project Implementation Method
The project is implemented using PIC16F877 along with ACS712 for current measurment, 555 timer IC in astable mode for driving the fuel injectors and the resistance divider method for measuring resistance on pins enabled with ADC
Benefits of the Project
1)Portable
2)Easy to use
3)User friendly
4)Cost efficient
5)No particular training required
Technical Details of Final Deliverable
At final the project will be able to identify between faulty and working ignition coil, spark plug and the fuel injector
Final Deliverable of the Project
Core Industry
Other Industries
Core Technology
Other Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| LCD 16X2 | Equipment | 1 | 600 | 600 |
| Test Tubes | Equipment | 4 | 1500 | 6000 |
| Fuel Pump | Equipment | 1 | 5000 | 5000 |
| ACS712 | Equipment | 1 | 400 | 400 |
| PIC16F877 | Equipment | 1 | 500 | 500 |
| regulator IC | Equipment | 1 | 50 | 50 |
| Generic Board PIC | Equipment | 1 | 2000 | 2000 |
| Fuel Injectors | Equipment | 4 | 2000 | 8000 |
| Ignition Coil | Equipment | 4 | 2000 | 8000 |
| Spark Plugs | Equipment | 4 | 1000 | 4000 |
| PCB Printing | Equipment | 1 | 10000 | 10000 |
| wooden structure | Equipment | 1 | 5000 | 5000 |
| Veroboards | Equipment | 2 | 700 | 1400 |
| Total in (Rs) | 50950 |
If you need this project, please contact me on contact@adikhanofficial.com
Cartera
To optimize our shopping marts we want to make a Smart Shopping Cart along with an Android...
TAN: Technology Assisted Navigation for visually-impaired
Our project aims to provide independent mobilization and navigation for the visually-impai...
Implementation and working of plc on elevator
The design of elevator control system with programmable logic control unit suitable for se...
Smart Shopping Cart
We are building a Smart Shopping cart, to provide the best shopping experien...
FPGA based Model Predictive Controller prototype for Academics
The Project is basically the research based advanced LAB project which related to the mode...