Energy Production Using Industrial Waste
Energy generation techniques are many in types, we used energy generation technique that is industrial waste treament using steam turbine.We have alot of industries that ouputs the exhausted gases of different kinds significantly affecting the enviornment and giving rise to another parallel activity
2025-06-28 16:32:25 - Adil Khan
Energy Production Using Industrial Waste
Project Area of Specialization Electrical/Electronic EngineeringProject SummaryEnergy generation techniques are many in types, we used energy generation technique that is industrial waste treament using steam turbine.We have alot of industries that ouputs the exhausted gases of different kinds significantly affecting the enviornment and giving rise to another parallel activity that is opportunity to generate energy.This gives support to industry economically as it makes working plants independent of national grid and some industries manage large scale energy production supply to national grid as well.
We are designing a prototype that treats output exhaust gases depicted by boiler action that somehow creates input for our steam turbine. Steam turbine is our key machine that supplies mechanical power to our generator as a result energy generation takes place.
All this mechanism is monitered by sensors including steam input pressure covering up the electronics part with LCD dispay.
Generated energy would be presented in an application based approach.Further more we will ammend our output presentation as suitable.
Project ObjectivesFollowing are project objectives:
1. Energy generation through waste industrial management.
2. Enviornment friendly approach.
3. Productive Waste management.
Project Implementation MethodImplementation steps are mentioned below:
1. Literature review.
2. Hardware simulation.
3. Software simulation.
4. Thesis.
5. Research paper.
As the project name suggests, energy generation must have significant benefits.
1. Efficient energy generation from waste gases that were of no use before this approach.
2. Same amount of gases polluting Environment then, now treated sophisticatedly and productively.
3. Less dependent on national grid, energywise self dependent.
4. Industrial Revolution.
Technical Details of Final DeliverableWe will visualize it only upon the completion of project and we now in software phase of our project. These deliverables are achieved by designing of blades of turbine and pressure of steam input and still we are on its literature review.
Final Deliverable of the Project HW/SW integrated systemCore Industry Energy Other Industries Others Core Technology Clean TechOther Technologies OthersSustainable Development Goals Good Health and Well-Being for People, Affordable and Clean Energy, Industry, Innovation and Infrastructure, Climate ActionRequired Resources| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Total in (Rs) | 78000 | |||
| Turbine | Equipment | 1 | 16000 | 16000 |
| Generator | Equipment | 1 | 6000 | 6000 |
| Boiler | Equipment | 1 | 10000 | 10000 |
| Sensors | Equipment | 10 | 500 | 5000 |
| Battery | Equipment | 2 | 6000 | 12000 |
| Microcontroller | Equipment | 2 | 3000 | 6000 |
| Integrated Circuit | Equipment | 5 | 600 | 3000 |
| LED Bulb | Equipment | 3 | 250 | 750 |
| Resistors & Wires | Equipment | 15 | 50 | 750 |
| LCD | Equipment | 4 | 1000 | 4000 |
| Charge Controller | Equipment | 1 | 5000 | 5000 |
| Printing and Stationary | Miscellaneous | 1 | 8000 | 8000 |
| Circuit Board & Fabrication | Equipment | 1 | 1500 | 1500 |