Electricity efficiency management system

Project Title

Electricity efficiency management system

Project Area of Specialization Electrical/Electronic EngineeringProject Summary

The introduction of electrical automation technology into the power system can greatly improve work efficiency, reduce the consumption of manpower and material resources in power enterprises, and effectively reduce the probability of human error.

Electrical automation streamlines systems controls so that electricity, electrical appliances, and fixtures power up and down on command. We will make a system which can detect the human presence in classroom if anyone is not available it will automatically turn off the electric appliances available room. Purpose is to convert manual Electricity efficiency management system to an automated system.

The concept is to detect the human body in classroom if anyone is not available it will automatically turn off and if anyone enters the classroom electric lights will automatically turn on.

Project Objectives

To make system which can detect the human presence in classroom if anyone is not available it will automatically turn off the electric equipment.

To convert manual electricity efficiency management system to an automated system.

To save the electricity to detect the human

Project Implementation Method

First, the requirement has been gathered from the electrician, after that the initial prototypes of the system were developed. The prototype using the sensors for detecting the humans in a room. The Prototype is worked on PIR sensor that detect the human temperature and movement. If the human in the room the system will detect the human and open the electricity of the room if any human is not in the room the system automatically will go in off mode

Benefits of the Project

Save the electricity

reduce the cost of electricity bill

low cost and power consumption

small form factor and unobtrusive and privacy-preserving interaction

Technical Details of Final Deliverable

The electricity efficiency management system will develop through PIR Sensors, diodes, Arduino mani, relay, transistor PIR motion sensor, wires, circuits, battery, and boards that build a system. Using Arduino mani for performing the coding task in python language on sensors and Finally a system develop will be the final deliverables.

Final Deliverable of the Project Hardware SystemCore Industry Energy Other IndustriesCore Technology Internet of Things (IoT)Other TechnologiesSustainable Development Goals Industry, Innovation and InfrastructureRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	47900
Diode and Resistors	Equipment	6	400	2400
PIR motion Sensor	Equipment	6	1500	9000
Relay 12v	Equipment	2	500	1000
Arduino mani	Equipment	2	6000	12000
battery 12v	Equipment	4	500	2000
Board and wairs	Equipment	9	500	4500
wood structure	Equipment	1	7000	7000
Requirement gathering and quality insurance	Miscellaneous	1	10000	10000