Designing and Development of an Electric Car

Project Title

Designing and Development of an Electric Car

Project Area of Specialization Electrical/Electronic EngineeringProject Summary

As we have seen that there are more and more petrol engine vehicles are introduced in market and due to this increase in petrol engines global warming, harmful gases and the other factors that harm our climate are increasing day by day. So, we have an aim that we should introduce cheap and efficient electric vehicles (EV's) in pakistan so we can over come this problem and take an initiative step towards green enviorment. As most of the countries including India are working on EV's to introduce in market for public. If we will use EV's then there will be almost no harmfl gases will be escaped in the climate and our Ozone layer wil remain protected.

Project Objectives

Our objective is to make Pakistan petrol engine free so there will be cheap means of transport availble for the public. First priorty is to make such vehicles that are enviorment friendly and by using EV's there will be not any emission of CO2 in the enviorment. We will make cheap vehicles for our public so they can easily afford them and can charge their battries at their home or also the charging stations provided by the Govt. (if it will get on commercial level).

Project Implementation Method

We will use a Dc motor that will drive energy from the battries attched. We are using a motor drive circuit that we regulate the speed of the motor according to our need and applying pressure on the throttle. It will be cheap means of transport and needs low cost maintanance. We are using Variable Regulated Lead Acid (VRLA) battries instead of Li-Po battries and we are providing Cruise Control activation during the drive by using Arduino Uno. 

Benefits of the Project

As dicussed above about the benefits and all the advantages od this project it will be cheap means of transport and requires low maintanance.

Technical Details of Final Deliverable

Final deliverables of this project is that it will be a 2 seater vehilcle that will run at a speed of 30 km/h to 40 km/h that speed is enough to be used in cities. These vehicles will be very useful to be used in cities. These vehices does not have any by product that willharm our enviorment. 

Final Deliverable of the Project HW/SW integrated systemCore Industry TransportationOther IndustriesCore Technology OthersOther TechnologiesSustainable Development Goals Industry, Innovation and Infrastructure, Responsible Consumption and ProductionRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	79400
Dc Motor 2KW	Equipment	1	17500	17500
Motor Drive	Equipment	1	5500	5500
Car Body	Equipment	1	33000	33000
Iron Sheet	Miscellaneous	1	7500	7500
Front Lights	Equipment	2	1700	3400
Tail Lights	Miscellaneous	2	1000	2000
Indicators	Miscellaneous	2	250	500
Seats	Equipment	2	5000	10000