Design and development of Body Area Network (BAN) for smart health monitoring using IOT
Today the solution towards health issues is just symptom-based or based on blood tests or imaging studies. The causes of such diseases should be identified well. We need to move from Symptom-based management to prevention and prediction to bring out cost-effective solution. Also the present
2025-06-28 16:31:21 - Adil Khan
Design and development of Body Area Network (BAN) for smart health monitoring using IOT
Project Area of Specialization Electrical/Electronic EngineeringProject SummaryToday the solution towards health issues is just symptom-based or based on blood tests or imaging studies. The causes of such diseases should be identified well. We need to move from Symptom-based management to prevention and prediction to bring out cost-effective solution.
Also the present budget for health department in our country is not sufficient to fulfill the requirement of people. So, this problem can be solved by reducing the number of patients.
Our proposed system uses the wearable technology and mobile application to bring cost-effective solution to above stated problems. Vital body parameters like Blood-Pressure, Body temperature and pulse-rate are continuously monitored with body sensors and data collected from these sensors is transmitted to mobile decive through Wi-Fi. The mobile application receives the data, process it and tells the patient about his current health condition. It also recommend medication if the patient's condition is going to be critical.
Objectives:
• To empower the patient with awareness of his body health.
• To bring out cost-effective solution to present health budget scenario of the country.
Project working objectives:
• To alert the patient with his realtime health condition by showing him realtime values of cirtical body parameters.
• To recommend the medication when patient's condition get cirtical.
• To alert the patient about heart attack.
Our project is consists of mainly two parts: Hardware and Software
In Hardware part of our project we use wearable body sensors that will be attached to human body and will be electrically connected to a Circuit board. The collected data from sensors is sent to nearby mobile decive through Wi-Fi module.
In Software part of our project we will develop a Mobile application that will receive the data from sensors and show the processed data on mobile screen.
The mobile application will tell the patient about his real-time health condition and will also recommend the medicine if the condition of patient goes cirtical.
• Empowerment of the patient with awareness of his body health.
• Shifting from Symptom-based treatment to personalized treatment.
• Reduce the number of patients, as there is care of personal health on daily basis.
• Cost-effective solution to current health budget scenario in our country.
• Healthcare is possible at anywhere anytime.
There will be prototype of proposed system with hardware, which includes body sensors and circuit board with Wi-Fi link. And mobile application that is used to process collected data.
Final Deliverable of the Project HW/SW integrated systemCore Industry HealthOther IndustriesCore Technology OthersOther TechnologiesSustainable Development Goals Good Health and Well-Being for PeopleRequired Resources