Design & fabrication of windsock with digital display
Windsocks are used to tell wind speed and the direction of the wind speed itself. Windsocks typically are used at airports to indicate the direction and strength of the wind to pilots. Students will fabricate wind sock which will be used in aerodromes. Students will also embed electronic system whic
Project Title
Design & fabrication of windsock with digital display
Project Area of Specialization
Project Summary
Windsocks are used to tell wind speed and the direction of the wind speed itself. Windsocks typically are used at airports to indicate the direction and strength of the wind to pilots. Students will fabricate wind sock which will be used in aerodromes. Students will also embed electronic system which will convert mechanical output changes in digital display including the display of humidity, wind speed, wind direction.
Project Objectives
|
- Fabrication of large scale windsock
- Development and implementation of digital display
- Accuracy & precise measurement of wind speed
Project Implementation Method
Implementation off this project is at those areas where you have to know about wind speed like most important is airports, other than this industrial areas
we did a survey at walton airpot and they asked if you will complete your project properlly we will give you a chance to implement you project at airport for facilitate them.
Benefits of the Project
The need of this project is most important at airports where you have to know the wind speed during takeoff and landings so the digital display of windspeed is easily show to the ATC and the pilots as well
Technical Details of Final Deliverable
we are making a large scale windsock which is primery system to know about wind speed.
we are makeing a system which tells us the wind speed at the digits on display.
we are using a anemometer which gives us the rpm and we will convert this rpm to the wind speed through the arduino programming
Final Deliverable of the Project
Core Industry
Other Industries
Core Technology
Other Technologies
Sustainable Development Goals
Required Resources
| Elapsed time in (days or weeks or month or quarter) since start of the project | Milestone | Deliverable |
|---|---|---|
| Month 1 | Done | Title Selection & Survey |
| Month 2 | Done | Literature Review |
| Month 3 | Done | Proposal Report & Defense |
| Month 4 | Done | Fabrication of Windsock till FYP 1 |
| Month 5 | Done | Coding & Calibration of Wind speed Sensor |
| Month 6 | partially Achieved | Testing & Troubleshooting/working on digital display |
| Month 7 | pending | Thesis writing |
| Month 8 | pending | Final Presentation of FYP 2 |
If you need this project, please contact me on contact@adikhanofficial.com
Catapult Launch Capable Glider
We are going to design and manufacture a lightweight operational glider, capable to launch...
Restaurant based table ordering system
In this proposal where we have a system of just grabbing customers knowing that tables are...
An Advanced IoT Based Home Security Automation System
The home security and especially the automatic security of home is the basic necessity and...
Virtual Tuberculosis Detector
In the present work, results of automatic classification of medical images are presented i...
Curve Road Alerting System Over IoT
The main aim of developing this Arduino based IoT project is to provide safe & secure...