This project deals with study of a Sinusoidal Pulse Width Modulated Inverter and all the parameters used to reduce the harmonics and give the good efficiency of the inverter. The project will be commenced by a basic understanding of the circuitry of the SPWM Inverter, the components used in its desi
Design & Analysis of DC to AC Three Phase Inverter
This project deals with study of a Sinusoidal Pulse Width Modulated Inverter and all the parameters used to reduce the harmonics and give the good efficiency of the inverter. The project will be commenced by a basic understanding of the circuitry of the SPWM Inverter, the components used in its design and the reason for choosing such components in this circuitry. Generally, only single phase SPWM inverters are used industrially, and certain instabilities have been found in their operation. With improper selection of system parameters, the inverter suffers different type of instabilities and many types of harmonics. Our attempt will be to observe the same for three phase SPWM inverter and analyze its parameters used to get a pure sinusoidal output waveform and fewer harmonic in its output current and voltage waveform. Three phase inverters are essential in many industrial applications for providing adjustable-frequency power.
Sinusoidal pwm is generated to form a pure sine wave ac. this will reduce harmonics. transfomer is used to step up the voltages.
Sinusoidal PWM is generated to form pure sine wave alternating current. DC power is suppled to switches. AC current is step up by using transformer. Speed can be controlled by changing the frequency.
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Three phase induction motor | Equipment | 1 | 8800 | 8800 |
| Three phase transformer | Equipment | 1 | 6600 | 6600 |
| Power Supply (40v, 10A) | Equipment | 1 | 3300 | 3300 |
| Buck Converter | Equipment | 2 | 800 | 1600 |
| Soldering wire | Equipment | 2 | 300 | 600 |
| Three phase Circuit breaker | Equipment | 1 | 2400 | 2400 |
| Mosfets and Heat sinks | Equipment | 26 | 185 | 4810 |
| Relay Module | Equipment | 3 | 1100 | 3300 |
| Voltage meter | Equipment | 4 | 700 | 2800 |
| Microcontroller | Equipment | 2 | 1150 | 2300 |
| Capacitors | Equipment | 18 | 105 | 1890 |
| Variable resistors | Equipment | 8 | 85 | 680 |
| Inductors | Equipment | 9 | 125 | 1125 |
| 40pin base | Equipment | 6 | 150 | 900 |
| Diodes | Equipment | 22 | 15 | 330 |
| Vero board | Equipment | 10 | 80 | 800 |
| M/M wire | Equipment | 60 | 12 | 720 |
| M/F wire | Equipment | 60 | 12 | 720 |
| Display Board | Equipment | 2 | 300 | 600 |
| Printing | Miscellaneous | 150 | 4 | 600 |
| Travelling | Miscellaneous | 12 | 180 | 2160 |
| Thesis | Miscellaneous | 2 | 1600 | 3200 |
| Total in (Rs) | 50235 |
INTRODUCTION: With the advancements in internet of things we come up with an idea of water...
Programmable Logic Controller (PLC) is a necessity and demand of every running commercial...
This project on Churn Prediction in Telecom. This would be helpful in the Telecom Sector....
The project requires to design and fabricate a Concept Mars Rover after studying the possi...
the intelligent fully responsive automated security system is a system in which we try to&...