CAR MONITORING AND BLACK BOX TECHNOLOGY
A Car Black box is a device installed in automobiles to record information related to vehicles Accidents. Information from these devices can be collected after a crash and analyzed to help in determining what the vehicles were doing before, during and after the crash or event. This
2025-06-28 16:30:44 - Adil Khan
CAR MONITORING AND BLACK BOX TECHNOLOGY
Project Area of Specialization Wearables and ImplantableProject SummaryA Car Black box is a device installed in automobiles to record information related to vehicles Accidents.Information from these devices can be collected after a crash and analyzed to help in determining what the vehicles were doing before, during and after the crash or event. This Project will be developed to trace the location of vehicle at the time of accident using GPS Technology and to displayed on the LCD of control room.
Project Objectives- To detect and record real time car Parameters and to warn the driver.
- To record ten seconds of data-five seconds before the crash and five seconds after the crash.
- To determine the cause of the accident, and provide ways to prevent a future accident.
- To develop vehicular tracking system to monitor and stolen vehicle recovery.
Proposal Submission
Design a Blackbox Module
Circuit Connection
Installation of Sensors And Cameras
Coding for sensors
Installation Of LCD for DATA Recording
testing for errors and ammendments
Benefits of the ProjectSeveral features of this project include:
- Vehicle Tracking through GPS.
- Remotely monitoring vehicle status.
- Detect and report the reliability of the vehicle.
- Efficiency data to improve vehicle and overall system performance.
- To diagnose and repair any issues that may arise while out on the field or at home base.
The main controll is Ardunio UNO.
Attached will be Sensors. break pressure sensor ,tyre blast sensor collision sensor ,Ultrasonic sensor.
Two cameras are installed.one inside the car and one infront of the car to record the condition of the car.
And an LCD display to Show the real time data recorder of the car.
Final Deliverable of the Project HW/SW integrated systemType of Industry Transportation , Security Technologies OthersSustainable Development Goals Good Health and Well-Being for People, Partnerships to achieve the GoalRequired Resources| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Total in (Rs) | 34210 | |||
| Arduino UNO | Equipment | 2 | 850 | 1700 |
| Break Pressure sensor | Equipment | 2 | 4000 | 8000 |
| Mic sensor | Equipment | 4 | 120 | 480 |
| LCD Display | Equipment | 1 | 8000 | 8000 |
| cameras | Equipment | 2 | 3200 | 6400 |
| Design of break sensor for car | Equipment | 1 | 1000 | 1000 |
| Design of black box Module | Equipment | 1 | 1200 | 1200 |
| usb ports male female | Equipment | 8 | 10 | 80 |
| GPS module and GSM module | Equipment | 1 | 5000 | 5000 |
| Miscellaneous cost | Miscellaneous | 1 | 2000 | 2000 |
| Electronic components | Equipment | 1 | 350 | 350 |