capacity analysis of pof

Project Title

capacity analysis of pof

Project Area of Specialization Mechanical EngineeringProject Summary Our aim is to Carryout capacity measurement of clothing factory,identify possible weak areas and suggest remedial measures to increase productivity  Time study procedure

Following is the procedure developed by Mikell Groover for a direct time study:

1. Define and document the standard method.
2. Divide the task into work elements.

   These first two steps are conducted prior to the actual timing. They familiarize the analyst with the task and allow the analyst to attempt to improve the work procedure before defining the standard time.

3. Time the work elements to obtain the observed time for the task.
4. Evaluate the worker's pace relative to standard performance (performance rating), to determine the normal time.

   Note that steps 3 and 4 are accomplished simultaneously. During these steps, several different work cycles are timed, and each cycle performance is rated independently. Finally, the values collected at these steps are averaged to get the normalized time.

5. Apply an allowance to the normal time to compute the standard time. The allowance factors that are needed in the work are then added to compute the standard time for the task.

Project Objectives

Our aim is to Carryout capacity measurement of clothing factory,identify possible weak areas and suggest remedial measures to increase productivity 

Project Implementation Method

By using stopwatch method to calculate and determine work measurement 

Benefits of the Project

The increase in productivity and efficiency of the industry.

Technical Details of Final Deliverable

External observer: Someone visually follows the person being observed, either contemporaneously or via video recording. This method presents additional expense as it usually requires a 1 to 1 ratio of research time to subject time. An advantage is the data can be more consistent, complete, and accurate than with self-reporting.Self-reporting: Self-reported studies require the target to record time and activity data. This can be done contemporaneously by having subjects stop and start a timer when completing a task, through work sampling where the subject records what they are doing at determined or random intervals, or by having the subject journal activities at the end of the day. Self-reporting introduces errors that may not be present through other methods, including errors in temporal perception and memory, as well as the motivation to manipulate the data.Automation: Motion can be tracked with GPS. Documentation activities can be tracked through monitoring software embedded in the applications used to create documentation. Badge scans can also create a log of activity

Final Deliverable of the Project Software SystemCore Industry ManufacturingOther IndustriesCore Technology Wearables and ImplantablesOther TechnologiesSustainable Development Goals Decent Work and Economic GrowthRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	10000
pof clothing factory	Miscellaneous	1	10000	10000