The purpose of this project is to save the precious lives which are affected due to road accidents every day, to achieve this objective our focus is on ?Informing the rescue teams about the accident spot in time?. According to the WHO?s infographics on road safety, nearly
Automatic Vehicle Accident Detection And Messaging System Using GPS And GSM
The purpose of this project is to save the precious lives which are affected due to road accidents every day, to achieve this objective our focus is on “Informing the rescue teams about the accident spot in time”.
According to the WHO’s infographics on road safety, nearly 1.25 million people die in road accidents every year, on average 3,287 dies a day. An additional 20-50 million are injured or disabled.
In this project, we will detect if any accident occur and send its location to Rescue Team.
To achieve this purpose, we connect piezoelectric sensors (vibration, and accelerometer), which detect the occurrence of an accident, locate the geographical coordinates at that instant and send it to the pre-saved number by GSM.
The objectives of the project “Automatic Vehicle Accident Detection & Messaging System using GPS and GSM” are:
A Piezoelectric sensor will first sense the occurrence of an accident and give its output to the controller.The GPS detects geographical coordinates of a Vehicle and send it to controller.Whenever an accident occurred, the controller send the geographical coordinates of the vehicle at that instant through GSM, to the phone number pre-saved in the EEPROM.
This project is beneficial in a way that:
1.Inform the rescue team on time.
2.Life save, after the accident by informing to the rescue team.
3. Trrafic congestion is avoided due to early response of rescue team, in urban area.
| Components | Specification |
| Power Supply (Lipo Battery) | 12volts,10000mAh |
| Ardiuno Board (uno) | input 6-10volts |
| GPS (GY-6MV2) | 5volts |
| GSM ( SIM900) | 9volts,2A |
| Accelerometer (LIS3dh) | 5.3volts |
| Vibration Sensor (SW420) | 5volts |
| LCD | 20*4, 5volts |
Components
Power Supply
(Lipo Battery)
Ardiuno Board (uno)
GPS (GY-6MV2)
GSM ( SIM900)
Accelerometer (LIS3dh)
Vibration Sensor (SW420)
LCD
| Elapsed time in (days or weeks or month or quarter) since start of the project | Milestone | Deliverable |
|---|---|---|
| Month 1 | Literature Review | Yes |
| Month 2 | Equipment Selection | Yes |
| Month 3 | Software Simulation | Yes |
| Month 4 | Controller coding | Yes |
| Month 5 | Hardware Design | Yes |
| Month 6 | Interfacing and integration of Circuit | Yes |
| Month 7 | Testing and verifying Results | Yes |
Our main aim is to automate course planning and to make a perfect degree planner b...
Course File Generator is a web application used to convert and generate one complete pdf f...
Tensile testing is a way of determining how something will react when it is pulled ap...
In our project garbage segregation Robot the main idea is to provide a segregated waste to...
KinoCrick is a project which will analyze the cricket bowler's action as valid or invalid....