AUTOMATIC TEMPERATURE AND MASK SCANING, DISINFECTION SYSTEM FOR COVID-19
We are designing ?Automatic Temperature and Mask Scanning Disinfection System for Covid-19?. In this project we are going to make a system that will scan the person at the entry of any crowded place where we want to make sure the proper implementation of SOPs. There will be a camera at the entry poi
Project Title
AUTOMATIC TEMPERATURE AND MASK SCANING, DISINFECTION SYSTEM FOR COVID-19
Project Area of Specialization
Project Summary
We are designing “Automatic Temperature and Mask Scanning Disinfection System for Covid-19”. In this project we are going to make a system that will scan the person at the entry of any crowded place where we want to make sure the proper implementation of SOPs. There will be a camera at the entry point that will determine whether the person having mask or not on his face based on that image the computer will allow the person if he/she wearing mask and allow to enter the place if the person has no mask the computer will show the message to wear the mask also there will be a temperature sensor to determine to normal human body temperature. When both conditions are satisfied the barrier at the gate will allow the person to go inside. Now we have installed a disinfection box inside the place in which the people will put there mobiles, wallets, keys etc. and the box will disinfect that object.
Project Objectives
The objectives of the project are:
- Objective #1: Image processing and machine learning for mask detection.
- Objective # 2: Temperature detection.
- Objective # 4: Automatic Barrier entry.
- Objective # 3: Automatic hand sanitization.
- Objective # 5: Disinfection box.
Project Implementation Method
-
Image processing and machine learning for mask detection.
In this part we will implement machine learning algorithm to detect the mask on the face with the help of tensor flow and OpenCv.
-
Temperature detection.
The sensor will measure the body temperature if the temperature is greater than 37 degree Celsius of less, the barrier will not open and the system will suggest for medication and if the temperature is normal (37C) the barrier will open.
-
Automatic hand sanitization.
It will sanitize the hands without human touch. There are some motors connected with Arduino that will get command through the raspberry pi.
-
Disinfection box.
In this box there are UV-light which is very effective to kill the germs.
Benefits of the Project
- Smart SOPs implementation.
- Reduce the Covid-19 spread.
- Reduce the risk of life.
- No human involvement is required.
Technical Details of Final Deliverable
- Raspberry pi.
- Camera.
- Temperature sensor.
- Arduino UNO.
- Motorized barrier.
- Disinfection box.
- Automatic hand sanitizer.
Final Deliverable of the Project
Core Industry
Other Industries
Core Technology
Other Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Raspberry pi-3 | Equipment | 1 | 14000 | 14000 |
| Arduino Uno | Equipment | 1 | 1700 | 1700 |
| Servo motor | Equipment | 2 | 400 | 800 |
| Camera | Equipment | 1 | 5500 | 5500 |
| UV lights | Equipment | 5 | 150 | 750 |
| Total in (Rs) | 22750 |
If you need this project, please contact me on contact@adikhanofficial.com
Speak up
. We are providing a Mobile base application that can help you in learning English by arra...
Digitalization of electric panel of degreasing plant
Degreasing is the removal of grease and oil from a surface. It is widely used to remove oi...
Smart Commercial Single Axis Solar Tracking System
Sunlight based tracker, a framework that positions an object at a point comparative with t...
Urdu Mobile Assistant
There are limited mobile assistants with close to Urdu Mobile Assistant (UMA) level perfor...
Ventilator using arduino with blood oxygen sensing for covid pandemic
Human lungs use the reverse pressure generated by contraction motion of the diaphragm to s...