automatic sensing umberlla

Project Title

automatic sensing umberlla

Project Area of Specialization Mechanical EngineeringProject Summary

This smart system will be able to detect the rain and sunlight and opens up the umbrella. In this smart system, there will be a raindrop and sunlight sensing system, which will give a reading proportional to the amount of rain and sunlight rays hitting it. It will consist of a rack and pinion system, the rack will be fixed to the umbrella such that when a transducer receives an exceeding value, it will give a signal to the motor attached to the pinion. The motor upon receiving the signal starts rotating the pinion and the will umbrella open up.

Project Objectives

• To design a rain and sunlight sensing system that can detect the rain and sunlight and opens up the umbrella

To design a rack and pinion system for opening the umbrella by using Arduino.

Project Implementation Method

this project comprises of Arduino programming to run Motors by sensors. ... us in understanding the concepts of “Fabrication of automatic sensor controlled Umbrella”. ... It reports, out of the blue, the execution of an acoustic rain sensor.

Benefits of the Project

• Designing of any part or component in 3D software
• Simulation and analysis on any part or geometry
• To write feasibility report of a project

Technical Details of Final Deliverable

technical details

• Designing a 3D model
• Analysis on model

Deliverables:

• Design and development of an algorithm and microcontroller for automated umbrella
• Design and Fabrication of structural frame of the automated umbrella
• Feasibility and cost analysis of automated umbrella for different cases

Final Deliverable of the Project Hardware SystemCore Industry ManufacturingOther Industries Others Core Technology OthersOther TechnologiesSustainable Development GoalsRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	12000
Canopy Fabric	Equipment	6	2000	12000