Adil Khan 9 months ago
AdiKhanOfficial #FYP Ideas

Automatic Irrigation Control System Using IoT and Android Application

The proposed system will be used to monitor and control the three phase induction motor using IOT devices and android application. The system is wireless and is accessible through Wi-Fi. It can be controlled remotely. The main advantage of the project is that it will run the system when all the phas

Project Title

Automatic Irrigation Control System Using IoT and Android Application

Project Area of Specialization

Internet of Things

Project Summary

The proposed system will be used to monitor and control the three phase induction motor using IOT devices and android application. The system is wireless and is accessible through Wi-Fi. It can be controlled remotely. The main advantage of the project is that it will run the system when all the phases match required criteria. That is 220 AC-volt for each phase. The system also provides security of Three-phase induction motor from any damage.

Project Objectives

The objectives of the project are to monitor and somewhat control the system. The objectives of project are followings:

               

  • Remote Access.
  • Upgrading Traditional System.
  • Failure Prevention System.

Project Implementation Method

This project is proposed to control three-phase induction motor by using the Arduino controller. The Arduino controller is used to produce the pulse width modulation (PWM) signals. And the motor speed is control by using the driver and three-phase inverter circuits. And also, this project has reduced the harmonics and switching losses of the circuit.

Benefits of the Project

  • A three-phase circuit provides greater power density than a one-phase circuit at the same amperage, keeping wiring size and costs lower.
  • In addition, three-phase power makes it easier to balance loads, minimizing harmonic currents and the need for large neutral wires.
  • Three-phase electric power is a common method of alternating current electric power generation, transmission, and distribution. It is also used to power large motors and other heavy loads.
  • Commercial and industrial businesses with greater electricity needs prefer three phase power because it is more efficient and less expensive to operate.

Technical Details of Final Deliverable

When the voltage suddenly decreases, the main parameters of motor changed. These parameters are motor speed and motor current during under voltage condition. The changing of these parameters may cause the heating in motor. Heating is an alarming abnormal condition for the motor which may cause motor to burn. It is very important to protect motor from these types of abnormalities. Secondly, the results also have been taken after simulation on vverloading condition which is very common in the motors. The following results represents the variations in the parameters of motor. These parameters include motor speed in RPM, voltage in volts and current in ampere Profile.  Inductive loads are extensively used in industries due to so many applications. It is very important to make some Smart system.

For this a smart panel is set which aims to operate the loads both manually and through IOT. The IOT controlling system is very efficient and more comfortable which we can use from anywhere through Wi-Fi. It is more easily and quickly operating system whereas compared to manual system because there will be no need of anybody to be available physically. This will not only save the cost of labors bit also make the system smart.

However, for backup support manually operation system is also used. If the automatic system does not work due to any technical problem, then we can easily operate the system by the manual controlling. Except these features, this smart panel is also beneficial from protection and controlling point of View. If any fault occurs in electrical side or mechanical Side, then we can control it through IOT from anywhere.

Final Deliverable of the Project

HW/SW integrated system

Core Industry

Others

Other Industries

Agriculture

Core Technology

Internet of Things (IoT)

Other Technologies

Others

Sustainable Development Goals

Decent Work and Economic Growth

Required Resources

Item Name Type No. of Units Per Unit Cost (in Rs) Total (in Rs)
NodeMCU Equipment160006000
Arduino Equipment130003000
lm7805 Voltage Regulator Equipment110001000
330-ohm resistors pack Equipment110001000
Female DC power jack socket Equipment150005000
470 uf capacitors Equipment120002000
Pvc strip connectors Equipment130003000
Connection wires Equipment128009600
acs712 current sensor Equipment144004400
Mega 2560 Equipment144004400
Three 12v Adaptor Equipment310003000
Digital Multimeter Equipment11000010000
Jumper wires Equipment120002000
Wire cutter Equipment111001100
voltage sensor Equipment315004500
5V 2A adaptor Equipment420008000
1 channel relay Equipment210002000
Total in (Rs) 70000
If you need this project, please contact me on contact@adikhanofficial.com
Wireless Power Transmission Via RF

  This project WPT (Wireless Power Transmission) aims to transfer the power from...

1675638330.png
Adil Khan
9 months ago
DESIGN, CALIBERATION AND FABRICATION OF AN UBIQUITOUS MINIATURE NODE E...

The gathering of energy data and to select the right energy KPI becomes very problematic b...

1675638330.png
Adil Khan
9 months ago
Development of Algorithm to detact deepfakes images and videos

Now a days, roughly 3.5 billion people are connected to internet. Millions of people are u...

1675638330.png
Adil Khan
9 months ago
Design a Quadcopter to inspect the power transmission lines

In power line inspection, it is made sure that the Inspection is safe. These inspections a...

1675638330.png
Adil Khan
9 months ago
Real Time-based Melanoma Detection Using Image Processing and Machine...

After reading multiple research paper I understand a dangerous cancers skin cancer melanom...

1675638330.png
Adil Khan
9 months ago