Automatic gate for initial detection of covid-19

The COVID-19 pandemic has left no country untouched.According to WHO one of the biggest symptom of COVID-19 is fever or high temprature, So here we will try to moniter the temprature of individuals without touching him and we can save the record of that temprature.Also we will use camera for face re

Project Title

Automatic gate for initial detection of covid-19

Project Area of Specialization

Biomedical Engineering

Project Summary

The COVID-19 pandemic has left no country untouched.According to WHO one of the biggest symptom of COVID-19 is fever or high temprature, So here we will try to moniter the temprature of individuals without touching him and we can save the record of that temprature.Also we will use camera for face recognition of individual passing through this gate and we will use alarm system for alert as the sensors record high temprature of camera detect strange face. The gate is equipped with automatic disinfecting spray which can be controlled by motion sensor as the motion sensor sense motion the spray will start automatically and stop after 2 seconds. The gate is also equipped with barrier hand and it will remain closed and allow no one to pass with disinfecting and temprature monitering

Project Objectives

=>Protection of our gate keepers and health care personals

=>Fever detection

=>Face detection and face recognation

=>Auto disinfecting and sanatizer spray

=>Time saving and money saving

Project Implementation Method

We will use 3 controllers and 1 motion sensor 2 temprature sensors and 1 ESP32 cam water pump and motor for barrier hand and gate designing.

We will implement our project on hardware the motion sensor is connected to arduino UNO and output of arduino is given to relay module for activating the disinfecting spray.

Temprature sensor is attached to 2nd arduino UNO and its output pin is attached to 2nd relay and alarm.

Esp32 cam is attached to 3rd arduino UNO and its output is attaced to 2nd alarm and  ESP32 is also connected through wifi with our laptop/PC through which we will moniter the face of individuals

Benefits of the Project

The aim of this project is to stop spreading of COVID-19 in our society. Now a days our gate keepers and health care personals are doing job at entrance gates to check the temprature of every individual entering and they have high chances of getting infected so we are targeting the safety of our gatekeepers and health care personals.. also we are doing face recognition which is for security purpose to insure the safety.

=>Face recognition.

=>Tempreture monitering and fever detection

=>Alarm and record keeping if record high temprature

=>Sanetizer saving

Technical Details of Final Deliverable

This gate will help to control spreading of COVID-19 and will do auto disinfecting and auto face recognition of individuals. It will help in time saving and money saving also it will help in security advancment for high security institution and departments 

Final Deliverable of the Project

Hardware System

Core Industry

Medical

Other Industries

Education , Security

Core Technology

Wearables and Implantables

Other Technologies

Sustainable Development Goals

Good Health and Well-Being for People

Required Resources

If you need this project, please contact me on contact@adikhanofficial.com