Adil Khan 1 year ago
AdiKhanOfficial #FYP Ideas

Automatic Control of AC and DC using PLC with backup system

Our project is to automatically switching power sources (WAPDA, Solar) using PLC and to power up the load along with charging of battery and this battery will be used as a backup in case when no source is available. For switching sources, PLC Ladder diagram is used. AC or DC loads can be used at loa

Project Title

Automatic Control of AC and DC using PLC with backup system

Project Area of Specialization

Electrical/Electronic Engineering

Project Summary

Our project is to automatically switching power sources (WAPDA, Solar) using PLC and to power up the load along with charging of battery and this battery will be used as a backup in case when no source is available. For switching sources, PLC Ladder diagram is used. AC or DC loads can be used at load side.

Project Objectives

The main aim of our project is to automatically switching power sources (WAPDA, Solar) using PLC and to power up the load along with charging of battery and this battery will be used as a backup in case when no source is available. For switching sources, PLC Ladder diagram is used. AC or DC loads can be used at load side.

Project Implementation Method

  • Ladder Diagram for programming of PLC according to our project.
  • Sources (Wapda and Solar Panel) are being switched by using PLC.
  • To get the 24V DC for input of PLC, Boost Converter is being used after the Solar Panel.
  • Charging system for battery charging from PLC output is designed.
     

Benefits of the Project

As our project is using PLC and switching of sources using PLC is not being done in industry. This project will provide benefit in order to cater the problem of voltage regulation at load side and makes industry work smoothly as there is also a back-up system if all sources are off. This project provides efficient and fast way for switching and operating.

Technical Details of Final Deliverable

PLC is main component in this project to control the sources and to make the sources give constant and stable input to PLC converters are used and at load side there is charging circuit and for that if output voltages greater than battery voltage level then it will charge.

At the end we will be having a stable system of switching between sources alongwith a battery backup system.

Final Deliverable of the Project

HW/SW integrated system

Core Industry

Energy

Other Industries

Core Technology

Others

Other Technologies

Sustainable Development Goals

Industry, Innovation and Infrastructure

Required Resources

Item Name Type No. of Units Per Unit Cost (in Rs) Total (in Rs)
PLC Equipment11300013000
Solar Panel Equipment150005000
Electronic Components Miscellaneous 170007000
Battery Equipment130003000
Total in (Rs) 28000
If you need this project, please contact me on contact@adikhanofficial.com
0
193
Smart Farming(seeding and spraying) in agriculture by using IOTS)

Internet of Things (IoT) technology has brought a revolution to man?s life by making every...

1675638330.png
Adil Khan
1 year ago
On-Board Integrated Charger For Electric Vehicles(using MMC)

On-Board integrated charger for EV using half bridge MMC(Modular Multilevel Converter).MMC...

1675638330.png
Adil Khan
1 year ago
design and development of gas turbine from automobile turbocharger1131...

The usual gas turbines are based on the axial flow mechanism. The air enters from the inle...

1675638330.png
Adil Khan
1 year ago
Animal Health Monitoring System

Our project is about detection of Animal diseases from Image processing. Since we know the...

1675638330.png
Adil Khan
1 year ago
Third eye for blind The smart cap

Eyes are most important organ for human. Without or with low vision capabilities humans ar...

1675638330.png
Adil Khan
1 year ago