Auto Power Supply Control System from four different sources to ensure no break power
The main objective of this project is to provide in the power system transformers may be loaded beyond their nameplate ratings due to a fault or some emergency conditions. This type of overloading can cause either short term failures or long term failures. Increase in hot spot temperature would also
Project Title
Auto Power Supply Control System from four different sources to ensure no break power
Project Area of Specialization
Project Summary
The main objective of this project is to provide in the power system transformers may be loaded beyond their nameplate ratings due to a fault or some emergency conditions. This type of overloading can cause either short term failures or long term failures. Increase in hot spot temperature would also lead to the accelerated ageing of the transformers resulting in transformer overload. So in order to keep the body temperature of the transformer within its nameplate rating, the transformer must be loaded efficiently in a controlled manner
Project Objectives
We decided to make an electrical system which solve these issue to ensure continuous supply under over load condition by load sharing.
Thus by the sharing load on transformer the transformer is protected .This will be done by connecting another transformer in parallelThe benefit of the project is to solve this issue to ensure continuous supply under over load condition by load sharing
Project Implementation Method
The benefit of the project is to solve this issue to ensure continuous supply under over load condition by load sharing
Benefits of the Project
The benefit of the project is to solve this issue to ensure continuous supply under over load condition by load sharing
Technical Details of Final Deliverable
decided to make an electrical system which solve these issue to ensure continuous supply under over load condition by load sharing.
Thus by the sharing load on transformer the transformer is protected .This will be done by connecting another transformer in parallelThe benefit of the project is to solve this issue to ensure continuous supply under over load condition by load sharing
Final Deliverable of the Project
Core Industry
Other Industries
Core Technology
Other Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| transformer 10A | Equipment | 2 | 7000 | 14000 |
| aurdino uno | Equipment | 1 | 1500 | 1500 |
| 5v relay | Equipment | 1 | 800 | 800 |
| LCD Display16*2 | Equipment | 1 | 230 | 230 |
| Hall effect sensor | Equipment | 1 | 1200 | 1200 |
| Potentiometer | Equipment | 1 | 50 | 50 |
| Circuit breaker | Equipment | 2 | 5000 | 10000 |
| resistor | Equipment | 4 | 4000 | 16000 |
| Total in (Rs) | 43780 |
If you need this project, please contact me on contact@adikhanofficial.com
Visitor Counting and Identification System using Facial Recognition
Visitor counting and Identification system (VCIS) is a web-based system that will use a Fa...
Osmoregulatory Watch
The osmoregulatory watch is one of the most important application , that should be invente...
Automated fish care system
We are designing a automated IOT Based and remotely monitored and controlled Fish Tank, Ca...
Text mining approach applied to reveal PiRNA and disease Associations
Topical investigation of piRNAs role in disease association has been elucidated in many st...
vizcon
we want to develop an extended reality app for architectural purpose that woul...