The conversion process of an internal combustion engine to an electric vehicle powered by batteries comprises many steps from choosing the vehicle, sizing a motor, and the type of batteries. This project takes a (Mehran Car) and converts it to an all-electric car with a DC motor and lead Lithium bat
Analysis and implementation of Electric Car using the VFD
The conversion process of an internal combustion engine to an electric vehicle powered by batteries comprises many steps from choosing the vehicle, sizing a motor, and the type of batteries. This project takes a (Mehran Car) and converts it to an all-electric car with a DC motor and lead Lithium batteries. The power steering and power low power components (LEDs, Etc) will be used for lowering the overall power consumption of the car. Operating a battery-electric vehicle will eliminate emissions inside our cities and reduce our dependence on oil. The energy used for our electric transportation will be as diverse as the electrical grid obtaining energy from coal, natural gas, nuclear, and some renewable forms. During the infancy of the automobile, electric and gasoline vehicles competed for dominance of the market. The all-electric vehicle lost because of the lack of range from current battery technology. Until recently, the electric car was dormant. The number of electric vehicles on the roads is increasing every year as people become more environmentally conscious and gasoline prices are volatile.
High efficiency
Reduced engine size for the same power
Low maintenance costs
High power factor
Constant speed
Optimizing energy flow for better efficiency
Predict available energy
Suggest the driving range of electric vehicle
Propose the motor control method for speed and braking system
Suggest more efficient driving behavior
Green Engineering project
Increase of vehicle efficiency
Decrease of vehicle weight
Removal of noise pollution and air pollution
Sustainable energy source
An electric vehicle can charge up at home and at work also
In the end, we will present an Electrical vehicle prototype at a low cost.
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| DC motor | Equipment | 1 | 25000 | 25000 |
| Arduino | Equipment | 1 | 1000 | 1000 |
| batterise | Equipment | 3 | 5000 | 15000 |
| charger | Equipment | 1 | 10000 | 10000 |
| power cable | Equipment | 10 | 100 | 1000 |
| FET | Equipment | 15 | 250 | 3750 |
| Diode | Equipment | 8 | 5 | 40 |
| BJT | Equipment | 4 | 50 | 200 |
| veriable resistor | Equipment | 1 | 1010 | 1010 |
| relays | Equipment | 5 | 1000 | 5000 |
| charge controller | Equipment | 1 | 2200 | 2200 |
| traveling | Miscellaneous | 10 | 1000 | 10000 |
| Total in (Rs) | 74200 |
This project will create an Urdu Voice Assistant using raspberry pi that will take voice c...
Robots have become the right hand of man and are moving towards advancement with each pass...
Text Reader allows someone with impaired vision to ?read? text from envelopes, letters and...
Nowadays, vertical framing is of interest due to higher productivity in the area unit and...
This project is a solution to the real-time problem in Power Systems. A power transmission...