An Electronic System For The Contactless Reading Of ECG Signal
ECG is the most useful noninvasive medical diagnostic test and is in very wide use.Quality of life of patients requiring repeated ECG measurements threatened by the need of several hospital visits, cost inefficiency of having of having ECG measurements at the hospitals and the travel cost and time.
Project Title
An Electronic System For The Contactless Reading Of ECG Signal
Project Area of Specialization
Project Summary
ECG is the most useful noninvasive medical diagnostic test and is in very wide use.Quality of life of patients requiring repeated ECG measurements threatened by the need of several hospital visits, cost inefficiency of having of having ECG measurements at the hospitals and the travel cost and time. For such patients continuous measurements gives a profound insight into the hearts condition. In this project a low cost ECG circuit was made that uses contactless electrodes for remote heath care monitoring
Project Objectives
The main objective of our project is to measure ECG contacless and reuse our electrodes.This contactless ECG is to use for remote health care monitoring of patient.
Project Implementation Method
Capacitive Coupling Method
Electrodes
Leads
Instrumentation Amplifier
High Pass Filter
Low Pass filter
Pre Amplifier
Notch Filter
Interfacing Screen
PCB
Benefits of the Project
Cost Effective
No Highly Qualified Staff Required
Electrodes will be reuseable
No AgCl wax is required
System is portable
Technical Details of Final Deliverable
Our project is measuring ECG through 3 leads instead of 8 and 12
This project will not require any qualified staff
For measuring ECG,no silver chloride paste is required
Final Deliverable of the Project
Core Industry
Other Industries
Core Technology
Other Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| AD624 | Equipment | 1 | 10000 | 10000 |
| IN4148 | Equipment | 4 | 80 | 320 |
| 9V battery | Equipment | 3 | 120 | 360 |
| PCB | Equipment | 1 | 4500 | 4500 |
| Resistors | Equipment | 10 | 10 | 100 |
| Variable Resistor | Equipment | 2 | 25 | 50 |
| Capacitors | Equipment | 12 | 10 | 120 |
| 36 micron copper electrodes | Equipment | 3 | 60 | 180 |
| Wires | Equipment | 25 | 30 | 750 |
| Screen | Equipment | 1 | 8000 | 8000 |
| Stationary (Printing) | Miscellaneous | 65 | 6 | 390 |
| Project Casing | Miscellaneous | 1 | 1600 | 1600 |
| Total in (Rs) | 26370 |
If you need this project, please contact me on contact@adikhanofficial.com
Shape Optimization of Rotor of Flywheel Energy Storage System
Flywheel Energy Storage System (FESS) is an emerging technology with notable applications....
Rear Fuselage Drag reduction of a High Speed Target Drone
Our project is to analyze the problem of pressure drag producing at the rear end of f...
Solar PV based wireless charger
Although many charging systems with high efficiency are available in the market and these...
Smart water irrigation system
This system consists of solar powered water pump along with an automatic water flow contro...
Power Electrical Controller for Wind Turbine
This final year project ?Electrical Power Controller for Wind Turbine? will include design...