A Solar Based Electric Car with GSM based Tracking system

  Project Implementation Method (less than 2500 characters)

Project Title

A Solar Based Electric Car with GSM based Tracking system

Project Area of Specialization

Robotics

Project Summary

• According to World Heath Organization (WHO), total contribution of transport to particulate air pollution can vary widely, from 12%-70% of the total pollution mix.
•  Low- and middle- income countries suffer disproportionately from transport-generated pollution, particularly in Asia, Africa and the Middle East.
• In part, this is due to the use of old and inefficient diesel vehicles and a lack of public and active transport networks.
• UK  and France will ban all petrol and diesel vehicle by end of 2030.
• Alternatives to fuel vehicles are Electric or Solar Cars.
• It is a main reason to go with this project (Electric Car) to create awareness of damage of transport pollution to eco-system and make it more practical in Pakistan.

Project Objectives

• A Car that is powered by Electric Motor that gets energized from its Rechargeable Batteries.
• It has GSM based Tracking System.
• It has constant Acceleration and will be more efficient.
• It can also be charged with Solar Energy.
• It will have a Low Manufacturing Cost.
• It wil be eco-friendly.

Project Implementation Method

• Firstly, work on a tracking system of Solar Electric Car which is made up of GSM interface with Arduino.
• Obtain a chassis or body of car and dismantle it according to requirements.
• Calculate the total load of car and select an efficient DC Motor whicih is suitable for load and has moderate cost.
• To charge the car with Solar Energy, select the suitable rating of Solar Panel and Battery.
• Assemble all the component in chassis.
• Finally test the car and will analyze it for suitable changes.

Benefits of the Project

• It is an eco-friendly as it produces no tailpipe emissions.
• It has a smoother drive than the conventional fuel vehicles.
• As it has few moving parts, so it has low manufacturing and maintenance cost.

Technical Details of Final Deliverable

• DC Motor is connected to battery with potentiometer and switch is connected between them.
• Car gets start by turning on the switch and potentiometer is used as its braking system.
• GSM is placed inside the chassis of a car which is used as a Tracking System.
• There is also a mechanism to charge the battery of a car with Solar Energy as well as with the Main Supply.

Final Deliverable of the Project

HW/SW integrated system

Type of Industry

Energy , Transportation , Security

Technologies

Robotics

Sustainable Development Goals

Affordable and Clean Energy, Climate Action

Required Resources

If you need this project, please contact me on contact@adikhanofficial.com