Zigbee Based Power Management System

Project Title

Zigbee Based Power Management System

Project Area of Specialization Electrical/Electronic EngineeringProject Summary

Zigbee is the wireless media that everyday devices use to connect to one another. The ZigBee wireless protocol offers low complexity, reduced resource requirements. The main purpose of this Project is to design advanced monitoring and controlling of electrical devices like light, fan, pump, bulb etc at home through wireless Zigbee device from remote place. To achieve these goals, the system runs a user-defined program on a special purpose processor, using real-world sensor inputs as operands.

Project Objectives

1. To provide Energy saving and power managing by using Zigbee.

2.To understand the basic concept of zigbee.

3.To achieve and maintain optimum Power utilization.

4.Implementation of zigbee scheme on a few home appliances.

5.Validation of result.

Project Implementation Method

• First we pair zigbee.
• Then we will interface Zigbee with microcontroller.
• we will interface our sensors with microcontroller.
• We will program our microcontroller to get data from sensors.
• Sensor used in our project are PIR,LDR, Temperature sensor, water level sensor
• We will interface LCD with microcontroller for displaying our data.
• Data will consist of Temperature, Voltage Current ,Power and light intensity.
• Controller perform calculations according to programming.
• We will control all these appliances with PC application and Remote

Benefits of the Project

• An integrated ZigBee automation system
• An energy saving solution
• ZigBee is the latest wireless technology which  provides three lowest solutions [2]

1. low data rate

2. low power consumption

3. low cost

• Low power consumption and power management are important characteristics of ZigBee.
• The ZigBee wireless protocol offers low complexity, reduced resource requirements and most importantly, a standard set of  specifications.
• Monitoring and controlling of power flow in distribution system.
• Monitoring of product at shopping malls.
• Educational Institutions like Schools , Colleges etc.
• Online security system of critical areas monitored and controlled from any where.
• Smart grid monitoring

Technical Details of Final Deliverable

• Setup of a few home appliance.
• Interface the sensors with microcontroller STM32.
• Sensing appliance’ data (amperes , voltage and power ) using microcontroller.
• Controlling appliances by desktop application and Remote control.
• Generate file of sensing appliance

Final Deliverable of the Project Hardware SystemCore Industry TelecommunicationOther IndustriesCore Technology Internet of Things (IoT)Other TechnologiesSustainable Development Goals Responsible Consumption and ProductionRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	47200
Zigbee	Equipment	4	6000	24000
12v power supply	Equipment	2	500	1000
modules	Equipment	10	150	1500
Microcontrollers	Equipment	2	800	1600
Sensors	Equipment	10	300	3000
speed controller	Equipment	4	250	1000
fans,bulbs and motor	Equipment	12	300	3600
Water tank ,Resistors wires	Equipment	4	150	600
Wood board	Equipment	1	800	800
PCB	Equipment	2	300	600
representation flex	Miscellaneous	1	500	500
Stationary things	Miscellaneous	20	200	4000
other servises	Miscellaneous	1	5000	5000