Water Flow System using IOT

Project Title

Water Flow System using IOT

Project Area of Specialization Internet of ThingsProject Summary

Real time monitoring of water system of any commercial and non commercial building or house. Such as monitoring water tank level through ultra sonic sensor, checking water flow through the pipelines and leakage if any however it must be   a major one, using flow sensors And controlling of all the taps(On and Off) using Solenoid valve. Everything will be monitored and controlled by user using mobile application.

Project Objectives

• To prevent water wastages by regular monitoring of water pipelines, water tank and water taps.
• Major cause of water wastage is leaked pipeline and uncontrolled water flow in desired taps.
• This system enables the user to monitor the water level of the water tank and any leakage in water tanks.

Project Implementation Method

At implementation phase :

• Designing(complete PCB) & module.
• Hardware coding.

WORKING :

Ultrasonic Sensor :

• Is measuring the level of water in the tank, fixed at the top.
• Shows reading in both LCD and Aurdino Serial Monitor in liters and cubic centimeters.

Solenoid Valve :

• Solenoid valve used in switching on and off the water tap by using a 2 – relay module with 12 volts(3 amperes) with the help of buck converter.

Water Flow Sensor :

• It is fixed at the start of the pipe and ends at the end of the pipe, and is used to measure the flow of water moving out of the tank.
• While showing the readings at Arduino serial monitor and LCD.

ESP 32 :

• The microcontroller used to control all the sensors and controllers to collect data from sensors and give results. It also contains a WI-FI shield which later on fetches and post data on firebase.
   

Benefits of the Project

• Mobile Application show the stats of all the hardware at real-time.
• This system enables the user to monitor the water level of the water tank and any leakage in water tanks.

Device own webserver 

Cloud DashBoard

Detect the leakage of water, gas or petroleum

Technical Details of Final Deliverable

Hardware Requirements :

• Esp32MicroController
• Ultrasonic Sensor Hc-sr04
• Wifi Router
• Solenoid Valve 1/2 inch 220v
• Water Flow sensor
• Electronic Components
• LCD (20,4) with ITC

Software Required :

• Android Studio
• Arduino IDE

Final Deliverable of the Project HW/SW integrated systemCore Industry ITOther Industries PetroleumCore Technology Internet of Things (IoT)Other Technologies Cloud Infrastructure, Wearables and ImplantablesSustainable Development Goals Clean Water and Sanitation, Industry, Innovation and Infrastructure, Responsible Consumption and ProductionRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	34090
ESP 32 MicroController	Equipment	3	850	2550
water flow sensor	Equipment	8	460	3680
ultrasonic sensor	Equipment	2	280	560
Selenoid value 1/2 guage	Equipment	5	900	4500
PCB design and making	Equipment	2	3200	6400
Water flow module	Equipment	1	4000	4000
Arduino UNo	Equipment	1	600	600
Amazon Web Server cloud (AWS)	Equipment	1	200	200
LCD with i2c	Equipment	2	800	1600
Poster with standee	Miscellaneous	2	400	800
Transportation	Miscellaneous	1	2000	2000
Report BOOK	Miscellaneous	6	1200	7200