WASTE TO ENERGY PLANT

Project Summary: A standalone waste to energy plant that demonstrates the modeling of a nonconventional power generation source that can deal with the rising power needs of Pakistan in the future. This domestically designed plant would act as a prototype of large scale genera

2025-06-28 16:36:43 - Adil Khan

Project Title

WASTE TO ENERGY PLANT

Project Area of Specialization Electrical/Electronic EngineeringProject Summary

Project Summary:

A standalone waste to energy plant that demonstrates the modeling of a nonconventional power generation source that can deal with the rising power needs of Pakistan in the future. This domestically designed plant would act as a prototype of large scale generation. Implementations and outputs of this project are purely dependent on resources and extents that are easily accessible domestically.

Project Objectives

Objective:

To design and demonstrate the working and modeling of a stand-alone Waste to Energy(WTE) plant domestically.
The eyes of This project to achieve the outputs that are implementable in domestic generations.

Project Implementation Method

Implementation Method:

The strategy used in its implementation is quite identical to that of coal-fired steam powerplant(only the fuel is changed i.e Waste).

1)A combustion chamber carrying domestic waste would heat the boiler that contains a regular flow of water.

2)This heating effect would convert the water into steam.

3) The steam would ultimately be a force to the rotor part(Turbine) that would act as a prime mover for a DC motor.

4) The DC would be converted to AC by installing an inverter circuit after DC generation.

5) The output of the inverter would be used to provide electricity to some domestic appliances to demonstrate the instant application.

Benefits of the Project

Benefits of projects

  1. It will help the countries to solved there power generating issues at cheap rates as the waste is free
  2. It will save millions of dollars that country uses to buy land for the dumping of waste which is further causing environmental calamities.
  3. By-products of Waste to Energy (WTE) can be utilized in constructing roads, bridges, etc.
  4. It is installation is very easy on all levels from high to low as per the availability of waste
  5. Slumping methane gas which is the major by-product of rotten waste causing an increase in global warming and fasting the glacier melting causing rise in temperature
Technical Details of Final Deliverable

Technical Details of Final Deliverable


As the output of our project is the Electricity (power generation ).The technicality involved in it quite similar to the coal-fired steam power plant but here the waste is our fuel source instead of coal which make it cheaper and reliable as waste is easily available especially in Pakistan Moreover we are aiming to invert the DC power which is produced by the plant into pure AC sine wave and operate the AC appliances in order to demonstrate the instant application of our model sine its the pilot model so we are producing power use at initials.

Final Deliverable of the Project Hardware SystemCore Industry Energy Other Industries Energy Core Technology OthersOther Technologies Clean TechSustainable Development Goals Industry, Innovation and InfrastructureRequired Resources
Item Name Type No. of Units Per Unit Cost (in Rs) Total (in Rs)
Total in (Rs) 80000
BOILER Equipment12800028000
TURBINE Equipment11500015000
SCHEDULE 80 PIPE Equipment150005000
COMBUSTION BOX Equipment150005000
GAS WELDING Miscellaneous 120002000
ELECTRIC WELDING Miscellaneous 160006000
PRESSURE METRE Equipment120002000
INVERTER Equipment150005000
DC GENERATOR Equipment130003000
LOAD EQUIPMENT Equipment120002000
PAINT Miscellaneous 120002000
PROTECTION Equipment110001000
BELT Equipment1500500
NOZZLES Equipment25001000
FRAME Equipment125002500

More Posts