ultra low powercmos lna for bleapplications7707
Electronic devices for communication or medical use need longer battery life therefore they need to have low power consumption. They need an Ultra Low Power design capable of operating for several days (for mobile phone) or even a year (for medical devices). An LNA is a very important part of a rece
2025-06-28 16:36:29 - Adil Khan
Electronic devices for communication or medical use need longer battery life therefore they need to have low power consumption. They need an Ultra Low Power design capable of operating for several days (for mobile phone) or even a year (for medical devices). An LNA is a very important part of a receiver front end and can be power consuming. This project is based on designing an LNA that operates with less power dissipation and is effective. The LNA will be designed on 65nm CMOS technology using Cadence Design Tool. The most efficient design shall be selected using careful evaluation and analysis. Once an operational topology is selected which meets the given specifications such as Noise Figure, Gain, Power dissipation etc. a research paper shall be written.
Project ObjectivesElectronic devices used for communication purposes or medical purposes have receivers in them. These receivers have a very important component which is an LNA. The objective of this project is to design a LNA that operates using ultra low power for BLE applications.
Project Implementation MethodThe project shall be completed by adopting the following procedure.
- Pre- Simulations: Simulations are performed on schematic level to achieve desired results. If the results are not achieve, the design shall be optimized, if the results are still unmatched then a new topology shall be selected and again simulations shall be performed.?
- PVT-Simulations: After required specifications are met, deviations in the designed shall be tested by PVT-simulations.?
- Layout Design: A layout is designed which then requires the following three simulations?
- Dynamic Rule Check?
- Layout Vs Schematic?
- Parasitic Extraction?
- Post Layout Simulations: At this stage the outcome of the design shall match the Pre simulation stage.
This project is beneficial for many reasons. A Ultra Low Power LNA can be used in electronic devices by making their battery life strong. Medical equipment like glucose or pressure monitor could report its status over Bluetooth LE. Pacemakers for a heart require wireless transmission. These medical equipments need a longer battery life. Devices other than medical equipment also require receivers that have low power consumption.
Technical Details of Final DeliverableIt is a research based project that needs to be designed and simulated using an advanced software tool, Cadence Design Tool. The technology used for this project will be 65nm CMOS technology. If the proposed design meets all specifications provided by IEEE for an LNA, a prototype shall be made for the design for further testing.
Final Deliverable of the Project Hardware SystemCore Industry TelecommunicationOther Industries Medical , Energy , Manufacturing , Media , Others Core Technology Internet of Things (IoT)Other Technologies Wearables and ImplantablesSustainable Development Goals Good Health and Well-Being for People, Industry, Innovation and Infrastructure, Responsible Consumption and Production, Partnerships to achieve the GoalRequired Resources| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Total in (Rs) | 70000 | |||
| Chip Fabrication | Equipment | 1 | 70000 | 70000 |