Trafficviz

Project Title

Trafficviz

Project Area of Specialization Internet of ThingsProject Summary

Increasing a load of motor vehicles on the roads results in higher accidents rates as well as obstruction in the traffic flow. In this system, we aim to add 3 features. A hologram will be placed in the traffic system. It will help a traffic warden to manage all the traffic from his office through the hologram. The second feature is to detect the ambulance using DIP and GSM technology. A CMOS image sensor is placed in the traffic system to detect the ambulance and change the signal light to green for the ambulance route. The third feature is to detect the accident and inform the rescue team and traffic police immediately

Project Objectives

Following are the problems our FYP is aiming to provide the solution with:

1. Accidents detection
2. Providing secure routes for ambulances
3. Control of traffic flow by using hologram technology

The number of accidents is increasing enormously along with economic and population development. An increase in the amount of traffic results in a higher accident rate and also it is accompanied by higher deaths because of a lack of emergency medical help. Our project will detect an accident and the extent of injuries to the victims and alert the nearby hospital and police so that they can rescue the victim. Due to the heavy traffic loads on the roads, ambulances find it highly difficult to reach the emergency centers and ultimately results in the death of the patient in need. Our FYP enforces on providing the ambulances with a safe and secure route with less traffic load so that they can reach hospitals on time. Controlling the flow of traffic on all the sides of the road becomes extremely difficult when either the traffic signals are not working or there is no traffic warden to control them. In our FYP, we will introduce hologram technology to direct the traffic flow. All most all kinds of people can get benefitted from our project like office going people, school and university going children, Traffic department, Emergency care patients and workers.

Project Implementation Method

     The hologram is a technique that records a pattern of interference produced by a scattered light (just like a laser) and reproduces the 3D image. If the signal turns off due to electricity or any other reason then the traffic warden can control all the traffic through hologram from the office. Through the hologram, the traffic warden will present on road and he will manage all the traffic manually but in reality, he’s in his office.

           Traffic management is a big issue nowadays in our society because of the growth of population and vehicles. We lost many lives due to emergency rescue vehicles such as the fire brigade and ambulance stuck in a traffic jam or traffic signal and waste their valuable time. Our aim to detect the ambulance using Digital Image Processing (DIP) and turn on the green signal for the ambulance route and another signal will go red. In this system, we give access to the ambulance driver if the ambulance is away from the signal and there’s no camera to detect the ambulance so he can use a wireless system to communicate with the traffic controller.

            These days there is more chance to increase the rate of the accident due to more traffic. The main object of traffic vision to detect the accident and inform the traffic controller and rescue team immediately through wireless communications techniques. GSM module will be used to send a message in a short time. When the accident occurs, the vibration sensor will be activated and send information to the rescue and traffic teams. Through the GPS system, we will find where the accident occurs. The accident can be detected by a vibration sensor which is used as a major module in the system

Benefits of the Project

1. Save and easy manage of heavy traffic.

2. Timely detection of accidents that result in a decrease in the mortality rate.

3. Convenient detection of vehicle location and damage extent.

Technical Details of Final Deliverable

Software used:

1. Operating System: Windows 10 or higher.
2. Front End: Implementation on hardware/simulation
3. Back End: MS SQL 2008, PHP, Python, MATLAB, DIP

Hardware Tools:

1. Hologram Technology
2. Traffic signals
3. Motor vehicles
4. Sensors
5. GSM
6. Camera
7. LEDs
8. Batteries
9. Tracker
10. Lasers

Final Deliverable of the Project HW/SW integrated systemCore Industry ITOther Industries Transportation , Security Core Technology Internet of Things (IoT)Other Technologies Artificial Intelligence(AI), Augmented & Virtual Reality, Robotics, Cloud Infrastructure, Wearables and ImplantablesSustainable Development Goals No Poverty, Affordable and Clean Energy, Decent Work and Economic Growth, Reduced Inequality, Life on LandRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	80000
Hologram Technology	Equipment	1	25000	25000
GSM and GPS Module	Equipment	1	8500	8500
Traffic Signal	Equipment	6	400	2400
Motor vehicle	Equipment	5	300	1500
Ambulance	Equipment	1	500	500
Sensors	Equipment	5	700	3500
Camera	Equipment	4	4000	16000
LED	Equipment	15	70	1050
Batteries	Equipment	10	200	2000
Trackers	Equipment	3	1000	3000
Laser	Equipment	1	300	300
LCD	Equipment	1	4000	4000
Power Adapter	Equipment	1	500	500
Resistance	Equipment	1	200	200
Preset	Equipment	1	50	50
Others	Equipment	1	1500	1500
Documentation	Miscellaneous	1	2000	2000
Stationery	Miscellaneous	1	3000	3000
Proposal	Miscellaneous	1	500	500
SRS	Miscellaneous	1	500	500
Prototype	Miscellaneous	1	4000	4000