Traffic Light Simulator

This project uses an Arduino and some LEDs to replicate a traffic light. It uses code as an internal timer and continues to run until you cut the Arduino's power supply. Okay. The materials are here as follows: 1. Arduino/Genuino/Geekcreit/Whatever Uno 2. Breadboard 3. Ju

Project Title

Traffic Light Simulator

Project Area of Specialization

Electrical/Electronic Engineering

Project Summary

This project uses an Arduino and some LEDs to replicate a traffic light. It uses code as an internal timer and continues to run until you cut the Arduino's power supply.

Okay. The materials are here as follows:

1. Arduino/Genuino/Geekcreit/Whatever Uno

2. Breadboard

3. Jumper Wires

4. Red, Yellow, and Green LED lights

5. Arduino USB 2.0 Cable

6.Resistor 100 ohm

Project Objectives

The objective behind the proposal is to limit the stoppage time and also regulate the traffic flow by means of the introduction of the sensors at aall major traffic signals.

Traffic signals are designed to ensure an orderly flow of traffic, provide an opportunity for pedestrians or vehicles to cross an intersection and help reduce the number of conflicts between vehicles entering intersections from different directions.

Project Implementation Method

 Supply power to the breadboard

Insert one side of the jumper wire into GND on the board. Lead the other side to the breadboard. Put it on the far right column on the breadboard, at the top.

Adding the LEDs

Place one end of the resistor in the column on the right, the same column we connected our jumper wire  out LEDs and resistors.

Completing the circuit.

Benefits of the Project

Traffic signals help for movement of traffic securely without any collision. They can reduce the number of accidents on roads like pedestrian accident and right-angle collision of two cars.The short, simplified answer is that traffic signals help maintain roadway safety. To expand, traffic signals play a vital role in how we design and interact with our cities.

Technical Details of Final Deliverable

Arduino/Genuino/Geekcreit/Whatever Uno

Breadboard

Jumper Wires

Red, Yellow, and Green LED lights

Arduino USB 2.0 Cable

Resistor 100 ohm

Final Deliverable of the Project

Hardware System

Core Industry

IT

Other Industries

Education

Core Technology

Robotics

Other Technologies

Artificial Intelligence(AI)

Sustainable Development Goals

Quality Education

Required Resources

If you need this project, please contact me on contact@adikhanofficial.com