tilt sensor for trunnion gun

Project Title

tilt sensor for trunnion gun

Project Area of Specialization Electrical/Electronic EngineeringProject Summary

we have to design a sensor system that measures the tilt angle -+15 degrees. this tilt sensor should be designed for heavy machinery and should be accurate. we have to show simulation in software as well as in hardware. our main goal is to build a unique inclinometer that is sustainable for a long time and it should be rugged for use in armed vehicles.

Project Objectives

our objective is to design a tilt sensor system that is a precise gravity referenced servo inclinometer that can be used for a wide variety of industrial and military applications. this system should be rugged and sustainable. it should have excellent temperature insensitivity and it should be shock and vibration resistant.

Project Implementation Method

high precision 2 axis (x and y) gravity referenced servo inclinometers suitable for both military and industrial applications. implementation will be demonstrated on software as well as the hard form will be checked on reference desk systems

Benefits of the Project

the benefits of this project are as follows:

1.Level control of machines and structures.

2. Safety control of cranes and lifting equipment.

3. Civil engineering studies

4. military applications.

Technical Details of Final Deliverable

the final deliverables of our fyp project are as follows:

1. Fully self-contained - connect to a DC power source and a readout or control device for a complete operating system.

2. High-level DC output signal proportional to the sine of the angle of tilt.

3. ±14.5° range.

4, Total electrical isolation between axes.

5.High accuracy specification Input voltage ±15 VDC; output signal ±5 VDC.

Final Deliverable of the Project HW/SW integrated systemCore Industry SecurityOther IndustriesCore Technology RoboticsOther TechnologiesSustainable Development Goals Industry, Innovation and InfrastructureRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	8000
servo gmeter	Equipment	2	1000	2000
accelarometer	Equipment	2	1000	2000
outter shell	Miscellaneous	2	500	1000
screws and sleeves	Miscellaneous	2	500	1000
internal wires and clippings	Miscellaneous	2	500	1000
7pin input and output	Equipment	2	500	1000