Surveillance UAV Plane System

Project Title

Surveillance UAV Plane System

Project Area of Specialization Artificial IntelligenceProject Summary             The goal of this project is to design an unmanned aerial vehicle flying system. The body of the UAV will like a wing plane shape that is controlled remotely by an operator on the ground. We will make a system which will have capability if safe land. i.e. even if better goes down and additionally there will be a GSM and GPS tracker in it. We use an brushless motor which will increses its speed to the necessary range. Rather, it requires adequate selection, customization, and modification of a pre-fabricated product. The main aim of this design is to follow fixed area coordinates and sends information back to receiver end. Project Objectives

The main objectives of our design are: 

Within the platform, the aim is to connect and tie together established technology development, research application (e.g. remote sensing and the study of cultural heritage) and applications in different societal sectors (e.g. for small security purpose rescue operations) to make them inform of each other in a collaborative learning environment and create new synergies. UAV plane moves in fixed area coordinates & a GPS guided autopilot to fly desired flight path. Project Implementation Method

UAV Design:

Model (SU-27) Overview:

• Microcontroller:    APM 

• Tracking Devices:    GSM & GPS

• Motors:      Brushless motors 2500 kv

• Controlling Device:   Remote controller 

The body of the UAV will like a wing  shape that is controlled remotely by an operator on the ground.

Additionally there will be a GSM and GPS tracker in it".Optionally, We shall give it fixed area coordinates & a GPS guided autopilot to fly desired flight path.The main aim of this design is to follow fixed area coordinates and sends information back to receiver end

Benefits of the Project

BENEFITS OF OUR DESIGN:

Security purposes:

For special security purposes used by arm forces.They are being used to look at perimeters and conduct constant surveillance over small areas

Remote Controlling:

The body of the UAV will like a wing  shape that is controlled remotely by an operator on the ground.

Used in devastated areas:

They can also be used in devastated areas where man support may not be available.

Portable & reliable: 

These types of UAVs must be portable by ground and very reliable for recurrent use

SAFE MISSIONS:

We will make a system which will have capability if safe land..

Technical Details of Final Deliverable

FINAL DELIVERABLE OF OUR DESIGN:

The final design will be "UAV flying system and able to achieve sustained & safety flight .The body of the UAV will like a wing  shape with camera that is controlled remotely by an operator on the ground.

Additionally there will be a GSM and GPS tracker in it".Optionally, we shall give it fixed area coordinates & a GPS guided autopilot to fly desired flight path.

Final Deliverable of the Project Hardware SystemCore Industry SecurityOther Industries Security , Telecommunication Core Technology RoboticsOther Technologies Artificial Intelligence(AI)Sustainable Development Goals Industry, Innovation and InfrastructureRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	65450
SU-27 (Plane models)	Equipment	2	8000	16000
Remote Controller FLY SKY I-6	Equipment	1	11000	11000
Brushless Motor(2500kv	Equipment	1	8000	8000
Lipo Batteries (1300mAH)	Equipment	3	2000	6000
Servo motor	Equipment	2	450	900
APM Flight Controller	Equipment	1	5500	5500
GPS-GSM	Equipment	1	7000	7000
FPV- Camera	Equipment	1	7000	7000
Simulator KIt	Equipment	1	2750	2750
Battery Lipo Charger	Equipment	1	750	750
Clour paper, Glue	Miscellaneous	1	550	550