Smart building based on IOT

Project Title

Smart building based on IOT

Project Area of Specialization Internet of ThingsProject Summary

Smart building based on IOT

It is a project of building management system.Our project will be divide in two parts.Transmitting Unit (sensor node) & Receiving Unit (devices & webserver).
Transmitting Unit will be consisting of all sensor modules interfacing with Arduino Uno. RF transmitter also interface with it.This Node will place in an area where Automation is needed. In this Node, Sensors will perform following task:
PIR for human detection.
LDR for light Intensity.
Lm35 for temperature of that area.
Gas sensor for gas leakage detection.
Flame sensor for fire alert.
Receiving Unit will be a Centralized system consist of Raspberry Pi & RF Receiver. Appliances will also connect with Raspberry Pi.
Sensor Node will transmit the signals to Raspberry Pi and according to that, Automation will be done.
Web server will also be create in the centralized system, where details of Automation would be seen in the web page. Using internet, one can access web page from anywhere.

Project Objectives

•  Energy Efficiency
• Automation without human intervention
• Integrating IOT into building management
• Developing management system for educational campus buildings 

Project Implementation Method

• High Level Design : Block Diagram of whole system and modules.
•  Low Level Design : Design Software Algorithms, Circuit Diagram, Hardware Schemetic layout design.
•  Implementation : Code of Algorithm & fabrication of hardware.
• Module Testing : Individual testing of each modules and nodes.
• Integration Testing : Complete testing with RF module.

Benefits of the Project

• Saving of energy. 
• Reduced the cost of electricity bill by extra usage of units.
• It is beneficial for occupany management & Safety management.
• Automation will be done without human intervention.
• Reduced human efforts.

Technical Details of Final Deliverable

• Project Prototype (complete hardware)
• Webpage application

Final Deliverable of the Project HW/SW integrated systemType of Industry Education , IT , Others Technologies Internet of Things (IoT)Sustainable Development Goals Affordable and Clean EnergyRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	43650
Raspberry Pi 3B	Equipment	1	6000	6000
Arduino UNO	Equipment	2	800	1600
PIR Sensors	Equipment	3	150	450
Temperature Sensor	Equipment	3	150	450
LDR Sensor	Equipment	3	60	180
Gas Leakage Sensor	Equipment	3	300	900
VGA Display	Equipment	1	3000	3000
Fire Sensor	Equipment	3	250	750
Raspberry Pi Adopter	Equipment	1	720	720
SD card	Equipment	1	1400	1400
Infrastructure	Equipment	1	5000	5000
RF module	Equipment	2	2500	5000
consumables	Equipment	1	5000	5000
Human Resource	Miscellaneous	1	5000	5000
others	Miscellaneous	1	5000	5000
Relay modules	Equipment	4	800	3200