Salp Swarm Optimization Algorithm Based Fractional Order PID Controller for Dynamic Responce and Stability Enhancement of an Automatic Voltage Regulator System

Project Title

Salp Swarm Optimization Algorithm Based Fractional Order PID Controller for Dynamic Responce and Stability Enhancement of an Automatic Voltage Regulator System

Project Area of Specialization Electrical/Electronic EngineeringProject Summary

Transient and steady-state performance of the (FOPID) controller over its conventional counterpart, this exploited its application in an automatic voltage regulator (AVR) system. Since the FOPID controller contains two more control parameters (µ and ?) as compared to the conventional PID controller, its tuning process was more complex. Thus, the intelligence of one of the most recently developed good solution to an optimization problem, called the salp swarm optimization algorithm (SSA), was utilized to select the optimized parameters of the FOPID controller in order to achieve the optimal dynamic response and enhanced stability of the AVR system. To conform the effeciency of the proposed method, its performance was compared with that of the recently used tuning methods for the same system configuration and operating conditions. Finally, in order to check the robustness of the developed system against the system parameter variations, a robustness analysis of the developed system was undertaken. The results show that the proposed SSA-based FOPID tuning method for the AVR system outperformed its conventional counterparts in terms of dynamic response and stability measures.

Project Objectives

1. To obtain FOPID gains by minimizing a time integrating error fitness function.
2. To Enhance Stability of an Automatic Voltage Regulator(AVR).

Project Implementation Method

1. Literature review on the basis of realm field has  been done by analysis of various aspects.
2. Design a Salp Swarm Optimization (SSA) based on FOPID by Simulation using MATLAB.
3. Finalize the project.

Benefits of the Project

1. It control the Overshoot Voltages.
2. It will give better performance then previous one’s.

Technical Details of Final Deliverable

To success the project will give the less trouble shooting and settling time of an AVR.

It reduce the error which created in PID controller .

Final Deliverable of the Project HW/SW integrated systemCore Industry Energy Other Industries Others Core Technology Artificial Intelligence(AI)Other Technologies OthersSustainable Development Goals Industry, Innovation and InfrastructureRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	56000
AVR	Equipment	2	6000	12000
PID Controller	Equipment	2	4500	9000
FOPID Controller	Equipment	2	9000	18000
Om-Amp,Resistor,Capacitor,Stationary,Printing etc	Miscellaneous	1	10000	10000
Power Supply	Equipment	2	3500	7000