The project is reducing the energy consumption using nanoparticles. First we need to determine experimental data of energy consumption without addition of nanoparticles in compressor lubricant from current and voltage taken with the help of data logger. Then we do mixin
Reducing energy consumption of refrigerator compressor using nanoparticles.
The project is reducing the energy consumption using nanoparticles.
First we need to determine experimental data of energy consumption without addition of nanoparticles in compressor lubricant from current and voltage taken with the help of data logger.
Then we do mixing process of nanoparticles in lubricant using hot plate apparatus. Left it for more than one day and check its solubility. If sedimentation does occur, your test is successful.
Then we again go for experimental data gathering using lubircant with nanoparticles and note the energy consumption. Then we do a series of calculations for validation of our objectives.
Our objective is to reduce energy consumption using nanoparticles according to the mass percentage of nanoparticles added.
Performing computational fluid dynamics of refrigerator.
In order to apply this project in domestic areas or commercially we can produced nanolubricants in mass quantities and use them instead of conventional lubricants utilized in refrigerator compressor in order to improve their performance.
The implementation of this project may help in reducing the power used by refrigerators on a large scale and result in saving electricity. This project promotes the responsible use of resources in industries and domestically.
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Beaker | Equipment | 1 | 250 | 250 |
| Magnetic Bead | Equipment | 1 | 500 | 500 |
| Alumina Nanoparticles | Equipment | 1 | 27000 | 27000 |
| Copper Sulphate (500 gm) | Miscellaneous | 1 | 800 | 800 |
| Ammonia (500 ml) | Miscellaneous | 1 | 2000 | 2000 |
| Ethanol (5 litre) | Miscellaneous | 5 | 120 | 600 |
| Deionize Water | Miscellaneous | 1 | 6000 | 6000 |
| Reaction Vessel pot | Equipment | 1 | 3000 | 3000 |
| Total in (Rs) | 40150 |
This project aims to generate animations using 3D laser scanners and Bio-Mechanical motion...
In this modern and world busy world life of students has become stressful, and we cannot t...
Whenever any tourist travels across the countries one of the major challenges one faces is...
Significant development has been made in the field of rehabilitation in the last few decad...
We had made a system for the proper water supply in the field. It is basically a system wh...