Real time video transmission and virtual holographic projection

Project Title

Real time video transmission and virtual holographic projection

Project Area of Specialization Information & Communication TechnologyProject Summary

Real Time Video Transmission & Virtual Hollo-Graphic Projection is a project which is based on the needs of  the 21st century. 

This Project is related to space communication where data transfer is extremely important & current data transmission techniques are very reliable but the extremely slow in speed. Currently the curiosity (Mars Rover) is able to communicate with earth with the speed of 32Kbit/s. Our Technology will enable the new gateways for the communication of era 21 where the Rovers will be able to communicate with the earth the thunder lightning speed of 10Gbits/seconds. While the maximum can be achieved up to 220Gbits/second. 

Project Objectives

The main objective of the project is to develop a communication system that will be the cheapest possible system and carry 100times more bandwidth than the exiting one. 

Project Implementation Method

As per our project plan. We will:

1) Physically implement our already developed Proteus simulation environment

2) Test the project in real Environment 

3) Adding the advanced Technology to achieve real time video transmission. 

4) Analyze project data to calculate the actual achieved speed

5) Provide final report

Benefits of the Project

1) Increase the bandwidth for mars Rover by 100 times the current available system 

2) Local Lan's on earth will be able to communicate by a speed of 200Gbits/second while the speed while the cost of installing the network equipment will be drastically reduced by almost 60 times of the current available system. 

Technical Details of Final Deliverable

This is a research-based project with the actual implementation of the project.  Therefore the final deliverable will be a firmware/ software and/ or Hardware as transmitters, and other firmware will be  receivers. The complete project will be sending and receiving video in real-time using the visible light spectrum.

Later On, this project can be utilized for the transmission of the internet service.

Software:

The software will be coded in processing 3 which will allow encoding of the video to 1 channel. And then decoding the video back on the receiving side ultimately displaying it on the LCD

Hardware:

Hardware will include the LED Driver with a high illuminating LED as the transmitter circuit and the Double stage inverting amplifier as the receiving circuit.

Some of the technical details are as follows. 

1) Technology: Li-Fi

2) Spectrum: 380nm - 750nm

3) Frequency Spectrum: 430 THz - 790 THz

4) Modulation Technique: OOK

Final Deliverable of the Project HW/SW integrated systemCore Industry TelecommunicationOther Industries IT Core Technology OthersOther Technologies Internet of Things (IoT)Sustainable Development Goals Industry, Innovation and InfrastructureRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	78974
CP2102 USB to TTL Converter	Equipment	2	377	754
E13009-2 Fastest Switching NPN Transistor	Equipment	6	2021	12126
FDS015 Fastest PhtoDiode by ThorLabs	Equipment	2	9297	18594
PCB Board	Equipment	2	3000	6000
3d Printing	Equipment	2	2000	4000
Raspberry Pi 3 Model B+	Equipment	1	12000	12000
Raspberry Pi-Camera Module	Equipment	1	9000	9000
5 Inch Touch Screen HDMI LCD for Raspberry Pi HDMI LCD	Equipment	1	6500	6500
Return Ticket Peshawar- Lahore	Miscellaneous	2	2200	4400
Hoteling	Miscellaneous	1	2000	2000
Food	Miscellaneous	1	1000	1000
Stationary + Thesis Printing	Miscellaneous	1	2600	2600