Power management and monitoring of solar PV through sensor using IOT
A solar monitoring system can help make you more aware of your PV system?s performance. It offers information about energy consumption and generation, optimizing energy usage, and damage to your solar system, among other topics. It?s important to monitor your solar setup in some manner ? without mon
2025-06-28 16:28:50 - Adil Khan
Power management and monitoring of solar PV through sensor using IOT
Project Area of Specialization Electrical/Electronic EngineeringProject Summary SUMMARYA solar monitoring system can help make you more aware of your PV system’s performance. It offers information about energy consumption and generation, optimizing energy usage, and damage to your solar system, among other topics. It’s important to monitor your solar setup in some manner – without monitoring, it can be difficult to figure out if your solar panels are operating at their best or not.
Project Objectives OBJECTIVE- Flexible Charge Controller
- Power Management And Monitoring Of Load
- Controlling Of Load
- Notification Of Over Load
- Internet Of Things (Iot)
- Arduino controller
- Power supply
- WiFi module
- Charge controller
- Relay module
- Solar panel
- Current sensor
- Voltage sensor
- Data Base
We used microcontroller name arduino mega 2560 its new updated microcontroller and can be used for multi tasking programmed.

´To operate our project circuitry we used 5v 2A power supply module which provide 5v from 12v dc source.

´To connect our circuitry with internet we used WiFi module to update status and sending notification to operator.

´We design charge controller using relay module logic for controlling and management of load

´It is used to measure load current.

´It is used to measure the voltage of load and solar panel.


AVALIABLE CHARGER CONTROLLER ARE LOAD DEPENDENT I.E 1KW,2KW AND SO ON.
NOT EXISTING ANY MECHANISM FOR MONITORING AND MANGEMENT
NOTIFICATION AND UPDATION
Technical Details of Final Deliverable TECHNICAL DETAILS:WE DESIGN FLEXIABLE CHARGE CONTROLLER
USING SENSOR WE CAN MONITOR AND CONTROLLED THE LOAD
FOR NOTIFICATION AND UPDATION WE USED WIFI MODULE ALSO USED FOR IoT.
Final Deliverable of the Project Hardware SystemCore Industry Energy Other Industries Others Core Technology Internet of Things (IoT)Other Technologies OthersSustainable Development Goals Affordable and Clean EnergyRequired Resources| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Total in (Rs) | 49500 | |||
| SOLAR PANEL 70 WATT | Equipment | 1 | 4000 | 4000 |
| RELAY MODULE | Equipment | 4 | 2000 | 8000 |
| CONTROLLER 2560 R3 | Equipment | 2 | 1000 | 2000 |
| POWER SUPPLY FOR CIRCUIT (12V 7A) | Equipment | 2 | 1000 | 2000 |
| CURRENT SENSOR | Equipment | 4 | 1000 | 4000 |
| VOLTAGE SENSOR | Equipment | 4 | 750 | 3000 |
| BATTERY | Equipment | 2 | 11000 | 22000 |
| WIFI MODULE | Equipment | 3 | 1000 | 3000 |
| SOCKET BOARD | Equipment | 4 | 375 | 1500 |