Adil Khan 1 year ago
AdiKhanOfficial #FYP Ideas

Non Invasive Glucometer

Non-Invasive Glucometer project is about measuring glucose level in blood without pricking or taking out blood so that the diabetic patient can easily and regularly measure their blood glucose/sugar level without any pain or discomfort. Recently only Invasive techniques are available in Pakistan Mar

Project Title

Non Invasive Glucometer

Project Area of Specialization

Wearables and Implantable

Project Summary

Non-Invasive Glucometer project is about measuring glucose level in blood without pricking or taking out blood so that the diabetic patient can easily and regularly measure their blood glucose/sugar level without any pain or discomfort. Recently only Invasive techniques are available in Pakistan Market to measure blood sugar level. 

Near infrared spectroscopy will be used to measure blood glucose as according to recent studies it is expected that glucose has specific absorption and reflection behaviour towards specific wavelengths in near infrared region

Project Objectives

The objective of the project is to measure glucose in a non-invasive way and also get accuracy and stability in the readings.

To make a small handheld device 

Project Implementation Method

Near infrared spectroscopy will be used to measure glucose level in blood , specific wavelengths from the near infrared region will be selected that are transmitted through the finger and recieved at the other end or same side of the finger through photodiode reciever. Then variations in the recieved signal is studied and analyzed.

Benefits of the Project

A new device in Pakistan's market that can measure glucose non-invasively as recently all the devices require blood to check sugar level in blood.

beneficial to people who suffer from trypanophobia(needle phobia)

Diabetic can easily and regularly check their blood glucose level without any pain or discomfort.

Technical Details of Final Deliverable

A small handheld device that can display continuous blood glucose reading.

Photodiode reciever will detect the signals from 4 IR leds from near infrared region. The signals will be amplified and noise will be removed if any. Then the signals will be analyzed and calculated to display glucose value on LCD.

Final Deliverable of the Project

HW/SW integrated system

Type of Industry

Medical , Health

Technologies

Wearables and Implantables

Sustainable Development Goals

Good Health and Well-Being for People

Required Resources

Item Name Type No. of Units Per Unit Cost (in Rs) Total (in Rs)
IR led from digikey Equipment4350014000
940nm Ir led and photodiode pair from pakistan Equipment22040
photodiode reciever Equipment52801400
instrumentation amplifier Equipment46902760
op amp Equipment850400
microcontroller arduino Equipment120002000
PCB board + fabrication Equipment130003000
printing+others Miscellaneous 150005000
vero board + resistors +capacitors Equipment130003000
pipe to hold led and photodiode Equipment1100100
LCD Equipment115001500
Total in (Rs) 33200
If you need this project, please contact me on contact@adikhanofficial.com
0
196
Autonomous Slam Based Robotic Wheelchair for Immobilized People

We did an innovative project that is based on autonomous navigation system under neural as...

1675638330.png
Adil Khan
1 year ago
Eye Cursor Control Mouse

The purpose of this project is to give a facilitate disable people who cannot move anythin...

1675638330.png
Adil Khan
1 year ago
A prototype for flood warning and management system using mobile netwo...

Summary/Abstract: We propose a novel prototype for an early flood warning and monitoring...

1675638330.png
Adil Khan
1 year ago
Design and Analysis of Continuous Flow Left Ventricular Assist Using C...

Congestive heart failure (CHF) is a chronic progressive condition that affects the pumping...

1675638330.png
Adil Khan
1 year ago
INGO Android game based on voice recognition

As mobile phones are in boom, we can see games are moving from boards and grounds to handh...

1675638330.png
Adil Khan
1 year ago