JET TURBINE ENGINE TEST BENCH

Project Title

JET TURBINE ENGINE TEST BENCH

Project Area of Specialization RoboticsProject Summary

The project consist of a test bench that will house a single spool single shaft jet enine and design of its  FADEC (full authority design and engine control) which is used to control the engine parameters by recieving multiple inputs and the effect of inputs on those parameters and then it will integrated with hardware .A GUI will be used which will allow us to choose which parameters to display.

Project Objectives

The primary objective is to design a soft jet turbine engine and its fadec for testing purpose and to display parameters on GUI.

Project Implementation Method

starting it by engine modeling of single spool single shaft turbofan engine and then designing its fadec which will control the various parameters of engine by recieving multiple inputs and their respective outputs which will be controlled according to our design then results of our parameters will be verified using OEM data graphs and  it will  implemented on dsp kit  using sensors and data will obtained using DAQ cards Desired inputs will be displayed and updated on a screen in an easily readable format according to the testers preference and requirement. Acquired data will be manipulated through programmable software in order to achieve usable information and numbers  will be displayed to the user.

Benefits of the Project

1.Simplifies the process by automating it and reducing the risk of human testers.

2.less number of parameters to be monitored by flight crews

3.Improved fuel efficiency

4.Vast use in military aviation

5.Industrial application

Technical Details of Final Deliverable

Soft engine model (TRI 60) which is implemented on dsp kit along with its fadec for cold testing of a disposable jet engine .Sensors will be precise and have ranges that cover all possible scenarios to avoid misreading of data and reduce errors, as precision is key in sensitive equipment. We will, also, make sure that all sensors are Avionics Grade.The project is running under the industrial automation and robotics lab.

Final Deliverable of the Project HW/SW integrated systemType of Industry Others Technologies RoboticsSustainable Development Goals Industry, Innovation and InfrastructureRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	79970
pressure sensor g1/4	Equipment	3	2990	8970
rpm/shonic sensor	Equipment	1	9100	9100
temparature sensor/probe	Equipment	3	6000	18000
signal conditioners	Equipment	3	4500	13500
texas dsp kit	Equipment	1	14500	14500
throttle controller	Equipment	1	4900	4900
report/printing/misc	Miscellaneous	1	10000	10000
housing	Equipment	1	1000	1000