First, we?ll be working on current and voltage sensing and their calibration then we will be measuring the amount of power used in KWh or units using Arduino. Then we will interface GSM/GPRS module with the Arduino and implement the Prepaid energy meter. After this we?ll implement IOT so that servic
IOT Based Prepaid Energy Meter
First, we’ll be working on current and voltage sensing and their calibration then we will be measuring the amount of power used in KWh or units using Arduino. Then we will interface GSM/GPRS module with the Arduino and implement the Prepaid energy meter. After this we’ll implement IOT so that service providers can track their consumer usage through user friendly interface. We’ll build 2 energy meters to demonstrate a step toward Smart Grid.
The final deliverables will consist of 2 prepaid single-phase energy meters which will be sending data to a station from which service providers can track their energy usage and other factors. Each energy meter will be made up of some central processing unit, current sensing circuitry, voltage sensing circuitry, and a GSM/GPRS module.
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Arduino | Equipment | 2 | 1500 | 3000 |
| GSM Module | Equipment | 2 | 4000 | 8000 |
| Current Trasformer | Equipment | 2 | 2500 | 5000 |
| Voltage Transformer | Equipment | 2 | 500 | 1000 |
| Others | Miscellaneous | 1 | 7000 | 7000 |
| Total in (Rs) | 24000 |
Basically, Our project is one part of ADAS(Advance Driver Assistance System). ADAS are ele...
In the past, the work done on object detecting robots they are not efficient. Those robots...
The particular interest on the energy side of mechanical engineering, specially thermodyna...
Flywheel is an instrument with the ability to store energy in the form of kinetic energy d...
Keeping medical records is very much important for organizations. For providing better car...