IOT Based Heart Monitoring System (ECG and PPG)
ECG is the first step to detecting the abnormality in the heart. It is very important to have a portable solution that can help people to get their ECG signals to analyze and consult with a doctor. In our project, We are not just dealing with ECG we are also working on PPG to check Blood Oxygen Satu
2025-06-28 16:28:05 - Adil Khan
IOT Based Heart Monitoring System (ECG and PPG)
Project Area of Specialization Electrical/Electronic EngineeringProject SummaryECG is the first step to detecting the abnormality in the heart. It is very important to have a portable solution that can help people to get their ECG signals to analyze and consult with a doctor. In our project, We are not just dealing with ECG we are also working on PPG to check Blood Oxygen Saturation Level and Heart Rate. Our project is also IOT based project that helps patients to send ECG signals to doctors and have a history of their ECGs on the internet.
Project Objectives- To make IoT-based, accurate, portable, and low-cost ECG and PPG.
- The Device will be able to collect the ECG and PPG signal for further analysis/diagnostics.
It is based on research and implementation like learning from any online source and implementing it in hardware and software according to our requirements. Learning from different sources like researching on the internet like if we are working on a microcontroller first we will learn about its syntax language then we will see its GPIOs., ADC, and then implement it on the board.
Benefits of the Project- Wireless monitoring and recording of patient's heart rate.
- It Could be used at home
- Beneficial for people in Remote areas!
- Avoidance of bacterial infection due to the use of multiple wires!
Final deliverable includes
Complete Embedded ECG device consists of microcontrollers like (ESP8232, Arduino, and STM) for collecting the data using ADC and doing further processing of the signal. The ECG and PPG data are being collected using sensors like AD8232 and Pulse Sensor. Our device also consists of a display screen and IOT support.
Final Deliverable of the Project HW/SW integrated systemCore Industry HealthOther IndustriesCore Technology Wearables and ImplantablesOther Technologies Internet of Things (IoT), OthersSustainable Development Goals Good Health and Well-Being for People, Life on LandRequired Resources| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Total in (Rs) | 70000 | |||
| Microcontroller Board | Equipment | 3 | 2000 | 6000 |
| AD8232 Sensor | Equipment | 2 | 3000 | 6000 |
| Pulse Sensor | Equipment | 2 | 1500 | 3000 |
| Wi-Fi Module | Equipment | 2 | 1000 | 2000 |
| LCD Display | Equipment | 1 | 15000 | 15000 |
| ECG Electrodes | Equipment | 1 | 3000 | 3000 |
| Bread Board Wires etc | Miscellaneous | 1 | 1000 | 1000 |
| 3D Printing | Miscellaneous | 1 | 5000 | 5000 |
| Thermal Printer | Equipment | 1 | 8000 | 8000 |
| PCB Board | Equipment | 1 | 1000 | 1000 |
| PCB Design Printing | Equipment | 1 | 20000 | 20000 |