We want to make a prototype, that will be a Mobile Application . It will help PAKISTAN's SNGPL (SUI NORTHERN GAS PIPELINES LIMITED) to monitor and check gas pressure and consumption of different areas simultaneously. SNGPL takes pressure reading manually by sending their operators t
Gas pressure and consumption monitoring using IOT for SNGPL
We want to make a prototype, that will be a Mobile Application . It will help PAKISTAN's SNGPL (SUI NORTHERN GAS PIPELINES LIMITED) to monitor and check gas pressure and consumption of different areas simultaneously.
SNGPL takes pressure reading manually by sending their operators that maybe less quality of pressure data , time taking , health and safety risks to technicians/operators and carbon footprint for data collection.
We want that SNGPL may also monitor the consumption of any area . Because another problem being faced by SNGPL is distribution of gas to Industrial,Commercial and Domestic Sectors .
The main objective of this project is to reduce the problems that are faced by SNGPL like taking pressure reading manually,distribution of gas according to the usage of any area , time consuming , health and safety risk.
Project objectives :
Tools and techniques for this project are :
React Native platform will be used to develop application that will run on both android and IOS . Application will get pressure and consumption of gas from data base and show to SNGPL .
Arduino will be used in this project, Arduino is an open-source hardware and software company . It will access data from sensors and using esp8266 wifi module send gas data to database .
Pressure and flow sensors will be used to measure pressure and consumption of gas .
This project have very wide scoop , SNGPL will be able to monitor gas pressure of different areas on mobile application in their office or field .Not only this they will also be able to monitor the gas consumption of any area and according to that they can maintain pressure of gas in these area . As one of the main reason of gas shortage in some areas is due to distribution .
React Native platform will be used to develop application that will run on both android and IOS . Application will get pressure and consumption of gas from data base and show to SNGPL .
Arduino will be used in this project, Arduino is an open-source hardware and software company . It will access data from sensors and using esp8266 wifi module send gas data to database .
Pressure and flow sensors will be used to measure pressure and consumption of gas .MQ4 gas detection sensor will be used to generate alert if any leakage will occur where the hardware is installed on pipeline .
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| ARDUINO UNO R3 | Equipment | 2 | 680 | 1360 |
| NODE MCU ESP8266 WIFI | Equipment | 2 | 450 | 900 |
| MPA PRESSURE TRANSDUCER SENSOR FOR GAS | Equipment | 2 | 2500 | 5000 |
| FS1012-1100-NG | Equipment | 2 | 6200 | 12400 |
| MQ4 GAS DETECTOR SENSOR | Equipment | 2 | 275 | 550 |
| GPCM | Miscellaneous | 1 | 10000 | 10000 |
| Total in (Rs) | 30210 |
In the case of water leakage control systems used in urban water source tanks, constant&nb...
GPS based vehicle accident identification system is designed for Automobile Manufactu...
Online food ordering is the process of ordering food through the restaurant's own mob...
Develop an interface for calculating the carbon footprint generated by MUET via electricit...