Energy audit is a process that helps you to identify where your energy is losing and what steps you can take to improve energy efficiency. An energy audit is something that every homeowner/industrialist should be doing every two to three years in order
Energy Audit for Industrial and Residential sectors
Energy audit is a process that helps you to identify where your energy is losing and what steps you can take to improve energy efficiency. An energy audit is something that every homeowner/industrialist should be doing every two to three years in order to ensure maximum efficiency and spending.In any Industrial and residential area the only easiest way of saving expenses are found to be energy. In the recent years Pakistan has been facing an increase in energy demand due to its large population and tremendous increase of industrial sector electricity requirement. To improve national growth and to reduce the increasing energy demand, introducing PV (photovoltaic) system which reducing energy consumption is the best option and also helps in decreasing energy costs. The largest consumption in residential, industries and workshops from all available energy consuming sectors. Preliminary audit we first do to reduce the energy consumption. All the lighting data of the buildings were collected and an energy audit was conducted with the idea of introducing new system to reduce the energy consumption. The main scope of this energy audit is based on the idea of effective energy conservation in buildings. In this project we work on the residential and industrial consumption devices and reduce energy through different methodology.
The thought behind conducting the audit is to:
1.Develop standards for all energy consuming appliances and introduce practice of investigating these standards.
2.Promote the culture of energy conservation and energy independence..
3.Set procedures that make it mandatory for builders to get an energy conservation audit done beforehand.
4.Encourage peoples to opt for “retrofitting public buildings
5.Promote the concept of Green Building and construct a complete Green Building.
Step by Step Procedure of Work:-
The steps for conducting the energy audit are as follows:-
Preliminary Walk?Through Survey:-
The first step for carrying out a detailed energy analysis is to conduct a walk?through survey which will require to visit the facility and analyze the existing situation of energy consumption, number of rooms, the type of load being run and the equipment being used at the facility. The team will have the following checklist against which observations will be made:-
Checklist:-
Detailed Energy Survey:-
On the basis of the prliminary walk through which give us the current existing energy in building or sector.Base upon this data we perform detail energy survey.

LOAD MEASURMENT AND ANALYSIS DEVICES:-

LUX Meter:-

Energy audit has enormous benefits which are followings
At particular levels it has some of the major benefits of energy audit.
In summary, energy audit helps us to identify the existing energy aand consumption and it envolve to do meaure to maximize the load and efficiency.
Energy efficiency effect the three main factors
It'll be in the form of both report and hardware.For example at the end of the project we will do following work
Timer circuit:-
Timer circuit which will enable us to ON/Off the device through application which we have in our mobile.For example our geyser in university ON for 24 hour if we run it for 10 hours because 14 hours our geyser haven't used.Following calculations explain this scenario.
DOU of geysers are 180 days and 24 hours. If we operate geysers for 10 hours per day with timers circuit we can save following amount of money annually
| Name of Appliances | Quantity | Hours of Operation | Annul WAPDA (kWh) | Total Energy Cost (PKR) | Annual savings kWh | Annual Savings (PKR) |
| Geysers(1800W) | 4 | *Time of Use And **DOU | 31104 | 576668 | 18144 | 240278 |
2.Automatic room light controller
For example in many houses,institutions and industries people don't care for ON/OFF of lights.So through this device we are going to reduce the extra hours of lighting consumption.
On of the best deliverable of our project as followings.
RECOMMENDATIONS:-
We have done the audit of our university B hostel.Through this audit we give following recommendations to our university admin.

We give following recommendation to our university admin regardding to fans

SOLAR PANEL CALCULATIONS:-
We have done following calculations for our hostel

| Elapsed time in (days or weeks or month or quarter) since start of the project | Milestone | Deliverable |
|---|---|---|
| Month 1 | synopsis | yes |
| Month 2 | Programming of timer circuit | yes |
| Month 3 | Hardware of timer circuit and connect with heavy devices like geysers | yes |
| Month 4 | Preliminary walk through and detail energy audit of residential sector | yes |
| Month 5 | Lux analysis and retrofitting recommendations of residential sector(It's mean complete energy audit of any residential sectors) | yes |
| Month 6 | Energy Audit of industrial sectors and take remuneration from that company | IP(In process) |
| Month 7 | programming of Automatic on/off of Lights and hardware | IP(In process) |
| Month 8 | Internship in any energy audit company and strive for job in that industry if possible | IP(In process) |
| Month 9 | Report of FYP and convert our project into business | IP(In process) |
Internet of things is the network connecting between the devices which contain electronics...
Emotion Detection using Speech Recognition was a technology that extract emotional feature...
NET METERING constitutes significant economic incentives for customers who use DERs to pro...
Our Product Is Car Number Plate Recognition System and this will be the first release of o...
The project undertaken is the design and development of three-degree of freedom hinged qua...