Adil Khan 1 year ago
AdiKhanOfficial #FYP Ideas

Dynamic stepless reactive and unbalance power compensator

Technology is used for dynamic reactive power compensation, unbalanced load compensation, and voltage stability improvement. It can provide compensation in grid supply. Apart from the grid supply network, it can support dynamic loads fed from the generator. It can be operated dynamicall

Project Title

Dynamic stepless reactive and unbalance power compensator

Project Area of Specialization

Electrical/Electronic Engineering

Project Summary

Technology is used for dynamic reactive power compensation, unbalanced load compensation, and voltage stability improvement. It can provide compensation in grid supply. Apart from the grid supply network, it can support dynamic loads fed from the generator. It can be operated dynamically to compensate for fast varying capacitive, inductive and unbalanced loads. By varying the magnitude of AC terminal voltage of VSC, reactive power exchange takes place between the VSC and the AC source. If the magnitude of VSC voltage is more than the AC source voltage, capacitive current flows from the supply voltage to VSC and the device generates capacitive reactive power. If the magnitude of VSC voltage is less than the AC source voltage, inductive current flows from the supply voltage to VSC and the device generates inductive reactive power. If the amplitude of VSC voltage is equal to the AC source voltage, no current flow happens between the supply voltage and VSC; This device does not generate reactive power. Further, the device generates an appropriate magnitude of voltages at the AC terminal of VSC to compensate for the negative sequence current caused due to unbalanced loads. Hence, the source will be totally relieved from reactive current and negative sequence current (due to unbalanced loads). This results in the flow of balanced real current in all three phases in the Applications Instantaneous step-less power electronics-based dynamic compensator for dynamic reactive power (power factor) and unbalanced loads.

Project Objectives

The objective is to design a  dynamic step-less reactive/ unbalance power compensator using Simulink and then implement it on hardware. It will be a fast feedback control system consisting of power electronics devices.

PQvar is a new approach to power factor correction and load balancing. The modular design and compact structure make it the ideal solution for active step-less PFC and load balancing in industrial applications and commercial buildings. Compared to conventional PFC systems, PQvar offers a response time of less than 15 ms and a dynamic reaction time of fewer than 50 µs. It can compensate for both inductive and capacitive loads and achieve a power factor of 0.99.

Project Implementation Method

The schedule of this project is perhaps planned on a step by step strategy to meet various checkpoints to approach the final design. The idea is to strongly develop the theoretical aspects of the design and work on the literature review in detail to have the firm grip on the concepts. The next step is to show some software skills to develop the design on SIMULINK. Last but not the least; we will work on designing the project with the help of our hardware skills and interlink the software and hardware operation so as to design the final product with desired operations.

Benefits of the Project

The benefits of the project are as follows:

•Controllable reactive current source

•Extremely rapid dynamic compensation reaction time of less than

 50 µs and a state response time of less than 15 ms.

•Active compensation device for usage without capacitors or reactors to avoid resonance conditions.

•Compensation of both inductive and capacitive reactive power.

•Provides load balancing.

•Installation with conventional capacitor banks possible.

•Available for low-voltage and medium-voltage levels.

•Wide range of compensation outputs from 30 Kvar to 12,000 Kvar.

Technical Details of Final Deliverable

•Power quality compensator- Reactive (PQCR) will provide an instantaneous voltage reactive power compensation solution for inductive and capacitive loads for low or medium voltage networks.

•In addition, it will be improving power quality and efficiency of the electrical network, and ensuring grid compliance, PQCR reduces system losses, lowers the carbon footprint, and enhances the life of electrical installations.

Final Deliverable of the Project

HW/SW integrated system

Core Industry

Security

Other Industries

Energy

Core Technology

Others

Other Technologies

Sustainable Development Goals

Affordable and Clean Energy, Decent Work and Economic Growth, Industry, Innovation and Infrastructure, Reduced Inequality

Required Resources

Item Name Type No. of Units Per Unit Cost (in Rs) Total (in Rs)
Dynamic inverter for 1.5KW Equipment14000040000
DC/AC boost converter Equipment1500500
Step-up transformer Equipment1500500
Battery bank Miscellaneous 170007000
DC bus capacitor Equipment1025250
PWM reactor Equipment13535
Input filter circuit Equipment140004000
Main power contactor Equipment115001500
Auxilliary MCB Equipment117001700
Incoming power MCCB Equipment11200012000
Total in (Rs) 67485
If you need this project, please contact me on contact@adikhanofficial.com
0
184
Explain in detail the Elements of Effective Written Communication

Explain in detail the Elements of Effective Written Communication

1675638330.png
Adil Khan
6 years ago
Vision Based High Speed Sorting System

Automation and technology set the foundations of today's world because things are going to...

1675638330.png
Adil Khan
1 year ago
Solar based hydroponics system

1. Summary: Automation of greenhouse involves manipulating its control variables such as...

1675638330.png
Adil Khan
1 year ago
Film Cooling of Turbine Rotor Blade

Over the past fifty years, aircraft and power generation gas turbine designers have endeav...

1675638330.png
Adil Khan
1 year ago
DEEPFAKE DETECTION SYSTEM

In this day and age there are many technologies that help us in daily life but there...

1675638330.png
Adil Khan
1 year ago