Development of a Portable Walk Through Gate with Temperature Sensing Device

Project Title

Development of a Portable Walk Through Gate with Temperature Sensing Device

Project Area of Specialization Wearables and ImplantableProject Summary

Infrared temperature sensors work by focusing the infrared energy emitted
by an object onto one or more photodetectors. These photodetectors
convert the energy into electric signal, which is proportional to the infrared
energy emitted by the object. The main objective is to detect temperature
of personnel at the entry points of the halls, offices etc as protection measures
against COVID-19. Alarm system is added to detect the infected
person as its temperature is more than the normal temperature. We can
add automatic lock system on doors to make entry of only not infected persons.
We can take temperature of a huge gathering by using this device
and also detect who is violating the COVID-19 protocols.

Project Objectives

The task is to integrate the infrared thermometer on walk-through metal
detector for detection of temperature. It includes the study of microprocessor
for integrating it with a temperature sensor for detection of temperature
and for displaying of temperature on a monitor in real-time.

Project Implementation Method

In this project, IR thermal sensors, an LCD and an alarm will
be integrated with a micro-controller. The programming on it
will be done in Phthon. The microprocessor along with all other
components will be installed on a walk-through gate. This gate
will help in monitoring temperature of people passing through
it and display it on LCD and if temperature exceeds a certain
threshold, the alarm will be triggered.

Benefits of the Project

During this Covid-19 pandemic, this project come in very handy as it will be available at every organization to check covid without making any individual coming near one another.

Technical Details of Final Deliverable

The Expected deliverables of the project are as follows
• An alarm will be integrated with the digital monitor in order to notify
for exceeding temperature.
• The digital monitor displaying the value mounted on the detector will
show a value in green color for acceptable temperature and in red
color for exceeding temperature.
• Maximum number of body temperature sensors should be installed
that would convert analogue value of temperature and will show in
digital format for accurate results.
• Time Interval between body temperature scanning and results notification
in the form of alarm and monitor display should be (0.3 0.5
seconds).
3.3 Resources Required

Final Deliverable of the Project Hardware SystemCore Industry HealthOther IndustriesCore Technology Wearables and ImplantablesOther TechnologiesSustainable Development Goals Good Health and Well-Being for PeopleRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	65000
Raspberry Pi	Equipment	1	30000	30000
MLX90614	Equipment	5	4000	20000
LCD	Equipment	2	500	1000
Alarm	Equipment	5	200	1000
LEDs	Equipment	2	4000	8000
Wires	Miscellaneous	25	200	5000