Development and characterization of TiNiCu SMA through powder metallurgy route
The summary of the project is to develop the TiNiCu shape memory alloys through the powder metallurgy route. From the literature review, it is clear that 15 to 20 % porosity is present in already exist alloys prepared through the powder metallurgy route. The porosity should be decreased by changing
Project Title
Development and characterization of TiNiCu SMA through powder metallurgy route
Project Area of Specialization
Project Summary
The summary of the project is to develop the TiNiCu shape memory alloys through the powder metallurgy route. From the literature review, it is clear that 15 to 20 % porosity is present in already exist alloys prepared through the powder metallurgy route. The porosity should be decreased by changing the sintering temperature and compacting pressure. The mechanical properties of the developed alloys will be compared to already exist alloys prepared through the powder metallurgy route.
Other horizons are also explored regarding phenomenological models i.e., Sauza Aurrichio.
Project Objectives
- To develop the TiNiCu shape memory alloys through powder metallurgy route.
- To reduce the porosity by changing the sintering temperature and compacting pressure.
- To improve the mechanical properties by comparing with the already exist alloys.
Project Implementation Method
- Literature Review
- Composition of Alloy
- Development of Alloy (weighing, Mixing, Compaction, Sintering)
- Characterization and Testing
- Analysis
Benefits of the Project
- TiNiCu shape memory alloys are used in biomedical.
- TiNiCu shape memory alloys are used in Aerospace.
- TiNiCu shape memory alloys are used in automobiles.
- Theoretical study to eliminate trial and error testing.
- SMA utilization in topology optimization.
- Generative manufacturing to be linked.
Technical Details of Final Deliverable
Processes involved:
1. Pre-alloyed powder mixer
2. Molds and dies
3. Sintering furnace
4. Mechanical press
Sampling details
1st same Ti50Ni50
2nd sample Ti50Ni49Cu1
3rd sample Ti50Ni40Cu10
:4th sample Ti50Ni47Cu3
5th sample Ti50Ni45Cu5
6th sample Ti50Ni42.5Cu7.5
Final Deliverable of the Project
Core Industry
Other Industries
Core Technology
Other Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Ni powder metal | Equipment | 1 | 20000 | 10000 |
| Cu powder metal | Equipment | 1 | 8000 | 4000 |
| Ti powder metal | Equipment | 1 | 16000 | 8000 |
| Analysis and Testing | Miscellaneous | 3 | 1000 | 3000 |
| Total in (Rs) | 25000 |
If you need this project, please contact me on contact@adikhanofficial.com
Covid Cases Predictions Using Machine Learning
The world is presently facing the challenges posed by COVID-19 (2019-nCoV), especially in...
Design and implementation of prepaid water monitoring system with anal...
A water metering system functions to regulate and limit the total amount of water availabl...
Flying Capacitor Multilevel inverter based shunt active power filter
The project is Flying Capacitor Multilevel Inverter based shunt active power filter is apo...
Smart Boiler: System Analyzer Using iot and Sensing Faults
. Parameters to be monitored are given below: 1. Temperature 3....
An Intelligent Health Assessment System for Crops Using Drone
Agriculture is the process of cultivation of plants and livestock. In Pakistan, the contri...