Designing a Data Acquisition System Using Labview
The purpose of this project is to design a data acquisition system using Labview software. In the proposed DAQ we are going to analyze the following parameters e.g 3-phase voltage (oscilloscope) , Phasor analyzer , Frequency Analyzer . All operations will be controlled usin
Project Title
Designing a Data Acquisition System Using Labview
Project Area of Specialization
Project Summary
The purpose of this project is to design a data acquisition system using Labview software.
In the proposed DAQ we are going to analyze the following parameters e.g 3-phase voltage (oscilloscope) , Phasor analyzer , Frequency Analyzer .
All operations will be controlled using myRIO .
CT and PT Sensors will be used for sensing .
Project Objectives
- To design a Data Acquisition System based on Graphical User Interface
-
Measurement of different parameters such as 3-phase voltage, Phaser analyzer, Frequency analyzer .
-
Reliable, easy to operate and must be user friendly.
-
Real time data analyzation.
Project Implementation Method
We are basically implementing our project in LabView. LabView is a system-design platform and development environment for a visual programming language from National Instruments. using labView we analyze 3 phase voltage and current with the controller 1900.
Benefits of the Project
•Normally high voltages cannot be measured through oscilloscope.
•Labvolt series DAQ systems are very expensive.
Labvolt series data acquisition systems only works through Labvolt EMS software
Technical Details of Final Deliverable
using this project we can easily measure 3 phase voltage, current and frequency and easily analyze phasor diagram. myRIO 1800 will be used as a controller and the sensors are voltage sensor and current sensors.
Final Deliverable of the Project
Core Industry
Other Industries
Core Technology
Other Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| myRIO 1900 | Equipment | 1 | 65000 | 65000 |
| Voltage Transformer (step down) | Equipment | 5 | 250 | 1250 |
| Current transformer | Equipment | 5 | 165 | 825 |
| Relay Unit (for Protection) | Equipment | 1 | 350 | 350 |
| Total in (Rs) | 67425 |
If you need this project, please contact me on contact@adikhanofficial.com
Design and development of biped humanoid robot for social interaction
This project promotes the idea of a Human-Robot Interaction (HRI). Robotics is the main es...
Smart blinds by arduino
Currently, Bluetooth based wireless control is an increasing trend for automation systems....
Design analysis and fabrication of hybrid shrouded vertical axis wind...
This is about designing a hybrid system combining vertical exis wind turbine and solar pan...
Development of a software that assists speech therapy in Urdu
About 13% of the country?s population suffers from speech and communication disorder...
Fleet Management System
Our final year project is focused on Fleet Management System. Fleet managment system&...