Design and Fabrication of Tele Operated Garbage Collection Robot for Recreational Parks

  Project Objectives (less than 2500 characters)

2025-06-28 16:31:39 - Adil Khan

Project Title

Design and Fabrication of Tele Operated Garbage Collection Robot for Recreational Parks

Project Area of Specialization Internet of ThingsProject Summary Project Objectives

Garbage Collection Robot has following objectives:

Project Implementation Method

•In sequence, the method is identification of the needs required. Then these needs are analyzed to get specific components. These components are later integrated to get the desired output.

•Operations of Robot are controlled by user using Wi-Fi module. IoT based platform is used to control operations of Robot.

• Project Implementation Method can be classified into four  main categories;

1. Camera for real time display.

2. Movement  of the robot.

3. Collection of Garbage.

4. Disposal of Garbage.

• Camera for real time display:

            Camera is mounted at front of the robot to get real time display on laptop. Real time display is displayed on the mobile or laptop using application for camera.

• Movement of the robot:

             4 wheel drive (with independent motors) is used for movement of robot from one place to another. 

• Collection of Garbage:

               Garbage is collected using robotic arm actuated by servo motors. Robotic arm pick the garbage and drop it in detachable bucket. Operations of Robotic arm is controlled wirelessly using Wi-Fi module.

• Disposal of garbage:

                     Bucket is detached and garbage is disposed off. Detachable bucket is mounted on the base of the robot.

Benefits of the Project Technical Details of Final Deliverable

Our Robot will collect garbage in recreational parks. Robot will be operated by the user using Wi-Fi communication. Robotic arm with 3DoF will pick the garbage and drop it in the detachable bucket placed on the base frame of robot. For real time display camera is mounted at the front of the robot.

Final Deliverable of the Project HW/SW integrated systemType of Industry Others Technologies Internet of Things (IoT), Robotics, Clean TechSustainable Development Goals Good Health and Well-Being for People, Climate Action, Life on LandRequired Resources
Item Name Type No. of Units Per Unit Cost (in Rs) Total (in Rs)
Total in (Rs) 42080
Acrylic Sheet Equipment182103780
Aluminium Base Frame Equipment140004000
DC Gear Motors Equipment46502600
Wheels Equipment412505000
Laser cutting Miscellaneous 130003000
Labor Cost on Base Frame Miscellaneous 140004000
Double Ball Bearings Equipment47503000
PCB board Fiber Equipment1600600
Camera Equipment135003500
H bridge Equipment2275550
Micro controllers and parts Equipment1750750
5 cell battery (12V , 4A ) Equipment27001400
Connecting wires Equipment2150300
Wi-Fi module (Esp 8266) Equipment1350350
Nuts and Bolts/Spacers Equipment940360
Glue Equipment19090
Gripper Equipment1700700
ServovMotor (MG996R) Equipment47503000
Power Bank Equipment110001000
Battery (6V , 7A) Equipment111001100
Transportation Miscellaneous 130003000

More Posts