Adil Khan 1 year ago
AdiKhanOfficial #FYP Ideas

Design And Fabrication Of Food Waste Recycling Machine

Project Summary:                 Food Waste is one of the major problems encountered in daily life. Food Waste is a problem not only because it is difficult to dispose food waste properly but also beca

Project Title

Design And Fabrication Of Food Waste Recycling Machine

Project Area of Specialization

Shared Economy

Project Summary

Project Summary:

                Food Waste is one of the major problems encountered in daily life. Food Waste is a problem not only because it is difficult to dispose food waste properly but also because of

its adverse effects on environment, society and economy. Pre-Consumer and Post-consumer Food waste coming from House-hold, Hotels, Restaurants, and various food points has following adverse effects;

  1. Food waste rotting in land fills generate methane Gas, which has an impact 25 times higher on climate change than carbon dioxide.
  2. The Government spend a lot of capital to manage food waste such as transportation cost , labour cost, vermin control.
  3. Food waste causes Unhygienic environment, odor, wet waste and spillages.
  4. The environmental implications  of food waste to climate change is catastrophic.

Engineering Solution to this problem includes Sustainable Food Waste Management, Food Waste Recycling, and Utilization of Food waste. We will achieve these possible solutions by designing

“food waste recycling machine”.

Our Project aims to make food waste disposable and recycle it by converting it into feed-stock for in-vessel composting, anaerobic digestion and bio-fuels. “Food Waste Recycling Machine” Will reduce volume of food waste by 80 percent and will provide the suitable particle size and water content to use it as feed-stock.

   Benefits to society and common man includes;

  1. Limited Take up of storage spaces.
  2. Lighter Carrying Loads.
  3. Less/no Odor.
  4. Fewer/no Spillages.
  5. Promote Recycling.
  6. Promoting Circular economy model.
  7. Setting a trend of Green technology.

Project Objectives

 Project Objectives:

                      The aim of this project is to design and fabricate food waste re-cycling machine with following objectives:

  • To manage food waste by reducing its volume up to 80%.
  • To recycle the food waste by preparing a homogenized feedstock for in-vessel composting, anaerobic digestion and bio-fuels.
  • To take step towards green technology which is based on circular economic model(sustainability).
  • To avoid negative impacts food waste on society, environment and economy.

Project Implementation Method

  • Literature review.
  • Conduction of Survey to define scope of the project.
  • Conceptual Design.
  • CAD Modeling.
  • Validation Of Design Using finite element Analysis Software(ABQUS/ANSYS).
  • Fabrication.
  • Various Tests Analysis.
  • Thesis Writing.

Benefits of the Project

Commercial Benefits

•Reducing food waste collection cost(number of times the waste has to be collected is reduced).

•Save maintenance cost.

•Compost sale revenue.

•Save compost purchase cost.

•Vermin control cost.

Benefits to society

•Promote recycling.

•Limited take up of storages space.

•Lighter carrying loads.

•Less/no odor.

•Fewer/no spillages.

•Promoting circular economy model.

•Setting a trend of Green technology.

Technical Details of Final Deliverable

Conceptual Desgin

•Reducing the particle size in mixing and cutting chamber.

•De watering the reduced food waste in centrifugal action chamber.

•These processes deliver both the consistent particle size and control the water content necessary for further composting.

•The dry waste is collected in collection chamber.

Components

macerator

Dewaterer

Pumps

the macerator consists of crushing chamber which will comprise of blades and shaft that will bring the food waste into fine particles.

the dewaterer chamber will make the use of centrifugal action that wiil ensure that water has been separated from crushed food. The water is then drained and feedstock is collected in bin. 

Final Deliverable of the Project

Hardware System

Core Industry

Food

Other Industries

Manufacturing

Core Technology

Clean Tech

Other Technologies

Shared Economy

Sustainable Development Goals

Good Health and Well-Being for People, Clean Water and Sanitation, Affordable and Clean Energy, Decent Work and Economic Growth, Climate Action

Required Resources

Item Name Type No. of Units Per Unit Cost (in Rs) Total (in Rs)
Motor Equipment175007500
pump Equipment230006000
centrifugal chamber Equipment11500015000
cutting chamber Equipment11200012000
material Equipment11500015000
Total in (Rs) 55500
If you need this project, please contact me on contact@adikhanofficial.com
0
269
Implementation of Simple and Accurate DC-DC Converter Module for Power...

DC-DC converter especially used under the area of Power Electronics. Having a proper modul...

1675638330.png
Adil Khan
1 year ago
Smart Garbage Monitoring and Waste Collection System with Garbage Sort...

At present, in our city we see that the existing garbage bins placed at public places...

1675638330.png
Adil Khan
1 year ago
Speaking system for mute using hand gesture

The name of proposed project is ?Speaking system for mute people using hand gestures". The...

1675638330.png
Adil Khan
1 year ago
Kick-off

We are going to develop a virtual reality game for football lovers. This game is not only...

1675638330.png
Adil Khan
1 year ago
Health and Nutrition

The idea that is being proposed here is wanting to contribute to society by educating the...

1675638330.png
Adil Khan
1 year ago