A DC motor that convert electrical energy into useful mechanical work. many types of DC motor used in varirty of applications nowdays. hence the controlling of motor is nowdays raising issue seen in many area of application. Th
Controller of DC motor
A DC motor that convert electrical energy into useful mechanical work. many types of DC motor used in varirty of applications nowdays. hence the controlling of motor is nowdays raising issue seen in many area of application.
The controlling is meant to get our desribable output as ours needs.Apart from it coontrolling mechansim led to the idea of that,we could vary it's function as our needs so here we are providing the the solution and making it automatically that can perform variable functions performer.
Motor's Speed will be able to rotate in both anticlockwise or clockwise direction.
Motor's Speed will not be lesser than base speed.
Instant shutdown when speed of motor is higher than it's maximum output speed.
For DC motor controller after being selection on dc motor so further select the processsing unit as arduino and than make a interface between motor and arduino through using DC motor driver now by using the technique of pulse width modulation make it variable to work desriable speed.
Here we make close loop system and use a sensor to sense the current when output is not equal to input or set poitnt so it shows the error value and using integral state feedback that error will be minimize to make the motor runnig at set speed without consideration of load on it.
Motor will rotate in FORWARD & BACKWARD directions.
Speed of motor will be variable.
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| DC Motor | Equipment | 1 | 2000 | 2000 |
| Arduino | Equipment | 1 | 1500 | 1500 |
| Motor driver | Equipment | 1 | 1500 | 1500 |
| Breadboard | Equipment | 2 | 300 | 600 |
| LCD Display | Equipment | 1 | 300 | 300 |
| 10kohum variable resistor | Equipment | 1 | 500 | 500 |
| 10ohum resistor | Equipment | 1 | 100 | 100 |
| 4.7kohum resistor | Equipment | 1 | 100 | 100 |
| 1k resistor | Equipment | 1 | 100 | 100 |
| male to female jumper wires | Equipment | 15 | 200 | 3000 |
| male to male jumper wires | Equipment | 15 | 200 | 3000 |
| Switch | Equipment | 1 | 200 | 200 |
| 18650 Battery holder cell | Equipment | 2 | 300 | 600 |
| 18650 Battery cell 3.7V | Equipment | 2 | 500 | 1000 |
| Printing | Miscellaneous | 1 | 2500 | 2500 |
| Thesis Binding | Miscellaneous | 2 | 1000 | 2000 |
| Thesis Board and posters | Miscellaneous | 1 | 2000 | 2000 |
| Fuel for visits | Miscellaneous | 3 | 1000 | 3000 |
| Total in (Rs) | 24000 |
We aim to build a cloud based Fully Interconnected Point of Sales (POS) system with paper-...
The project is an Emotion Charting Device Using ECG and GSR Signals classifying into 7 emo...
This project is an Augmented Reality Assistant. In this project, SLAM based Augmented Real...