Comparison of a solar dish concentrator with different cavity receivers and working fliud
The project is related to renewable/sustainable energy, which has greater importance in the world. In the project, we have to examine the performance of the solar parabolic dish system. The solar dish is used for the conversion of solar energy to thermal or electrical energy. It has a wide range of
Project Title
Comparison of a solar dish concentrator with different cavity receivers and working fliud
Project Area of Specialization
Project Summary
The project is related to renewable/sustainable energy, which has greater importance in the world. In the project, we have to examine the performance of the solar parabolic dish system. The solar dish is used for the conversion of solar energy to thermal or electrical energy. It has a wide range of conversion efficiency and can be used for both electrical or thermal purposes.
Project Objectives
The main goal is to observe the best cavity receiver of a solar dish system at a particular working fluid. We have to take a number of cavity designs at different working fluids. The analysis based on the heat transfer characteristic of the receiver at a different flow rate.
Project Implementation Method
The project implemented based on the experimental analysis with numerical analysis. The numerical analysis will be conducted on software like Ansys. The results of both analysis will be compared to get the accuracy of the system.
Benefits of the Project
Solar dish system has many benefits :
It has higher conversion efficiency than other renewable technologies.No fuel consumption required.It can use widely in a world where the sunlight is in abundant form.In Pakistan, this system cab be more efficient because of the large duration of the presence of sunlight. No hazardous effect of using this system for the conversion of solar energy to electrical or thermal energy.Little maintenance required.
Technical Details of Final Deliverable
The analysis of the project will be conducted experimentally as well as numerical. For experimentally we have to prepare the design and fabrication of the system. For software analysis, we have to use Ansys. We have to compare both analyses to get accuracy of the system
Final Deliverable of the Project
Core Industry
Other Industries
Core Technology
Other Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| solar parabolic dish | Equipment | 1 | 25000 | 25000 |
| dish tracking system | Equipment | 1 | 27000 | 27000 |
| cavity receivers | Equipment | 3 | 4000 | 12000 |
| working fluids | Equipment | 4 | 1500 | 6000 |
| pumping system | Miscellaneous | 1 | 5000 | 5000 |
| stationary+ printing | Miscellaneous | 2 | 2500 | 5000 |
| Total in (Rs) | 80000 |
If you need this project, please contact me on contact@adikhanofficial.com
Person Identification using Autonomous Drone through Multi
Person Identification Using Autonomous Drone Through &nb...
Design of Indoor Drone Station
In recent past years, many new technologies emerged, which helped mankind to explore the u...
IOT and Solar Based Multipurpose Lawn mower
Agricultural automation is an interesting and challenging research area. This paper presen...
Home Virtualization
This project is established as a underling?s project and immobile stretches portion of opp...
Web based Grid connected photovoltaic system with dual axis solar trac...
When it comes to the growth of any country, energy is the main driving factor. There is a...