Adil Khan 1 year ago
AdiKhanOfficial #FYP Ideas

Brain control home automation

A brain-computer interface (BCI) is a new communication channel between the human brain and a digital computer. The ambitious goal of a BCI is finally the restoration of movements, communication, and environmental control for handicapped people. An electroencephalogram (EEG) based brain-computer int

Project Title

Brain control home automation

Project Area of Specialization

Electrical/Electronic Engineering

Project Summary

A brain-computer interface (BCI) is a new communication channel between the human brain and a digital computer. The ambitious goal of a BCI is finally the restoration of movements, communication, and environmental control for handicapped people. An electroencephalogram (EEG) based brain-computer interface was connected with a Virtual Reality system to control a smart home application. It offers an alternative to natural communication and control. It is an artificial system that bypasses the body’s normal efficient pathways, which are the neuromuscular output channels. Different brain states are the result of different patterns of neural interaction. These patterns lead to waves characterized by different amplitudes and frequencies. This neural interaction is done with multiple neurons. Every interaction between neurons creates a minuscule electrical discharge. This project deals with the signals from the brain. Different brain states are the result of different patterns of neural interaction. These patterns lead to waves characterized by different amplitudes and frequencies. The signal generated by the brain was received by the brain sensor and it will divide into packets and the packet data transmitted to a wireless medium (blue tooth). The wave measuring unit will receive the brain wave raw data and will convert it into a signal using the MATLAB GUI platform. Then the instructions will be sent to the home section to operate the modules (bulb, fan). The project operated with human brain assumption and the ON/OFF condition of the home appliance is based on changing the muscle movement with blinking.

Project Objectives

To design a real-time embedded system for controlling Electric appliances With help of BCI(brain-computer interface) technology.

Project Implementation Method

 In this project, we will control appliance with help of Brain–computer interfaces (BCI). BCIs are systems that can bypass conventional channels of communication (i.e., muscles and thoughts) to provide direct communication and control between the Bluetooth medium. (LAU) will receive the brain wave raw data and it will extract and process the signal using MATLAB platform. Then the control commands will be transmitted to the raspberry pi and Arduino to  process. With this entire system, we can turn ON/OFF appliance  accordingly through the configured brain signals.human brain and physical devices by translating different patterns of brain activity into commands in real time. With these commands, home appliances can be controlled.

Benefits of the Project

1.By By using BCI technology, brain actuated application can be done mainly for the paralyzed people who cannot move physically. Here controlling appliances by using Brain is done with the help of Brainsense.

2. The project will also be very useful for aged people to control the devices around them without any hassle of physically operating the devices.

  3.Illetrate people, who can’t operate IoT devices can be also benefitted from this project.

4.The project will also provide vital data for the research purpose in the field of BCI Technology.

Technical Details of Final Deliverable

The prototype of our project will contain an EEG sensor that will send the brain alpha wave to Arduino through the HC-05 module, which will be then send to MATLAB for digital filtration. After the noise is minimized the single will be analyzed by the Arduino and if the single means to turn or off a certain device, the required relay through which the device is connected, will turn on or OFF respectively.

our prototype will be made of

    • Mind Wave Mobile Or Brainsense
    • Laptop or Pc 
    • Arduino Uno/Mega
    • Bluetooth Module ( HC-05 )
    • USB Cable for Arduino
    • Relay Module
    • Home appliances

Final Deliverable of the Project

HW/SW integrated system

Core Industry

IT

Other Industries

Core Technology

NeuroTech

Other Technologies

Wearables and Implantables

Sustainable Development Goals

Good Health and Well-Being for People

Required Resources

Item Name Type No. of Units Per Unit Cost (in Rs) Total (in Rs)
Neurosky MIndwave mobile 2 Equipment13500035000
Arduino uno 3 Equipment113001300
HC 05 Equipment1630630
PCB Equipment220004000
Resisitors Equipment1020200
Miscellaneous Miscellaneous 110001000
Total in (Rs) 42130
If you need this project, please contact me on contact@adikhanofficial.com
0
212
Development of Hospital Steward Robot

Hospital is a very hustling and rushy place. It is very difficult for people spe...

1675638330.png
Adil Khan
1 year ago
Brain wave controlled bionic arm using eeg

Electroencephalography (EEG) is an electrode which can be placed over the skull to measure...

1675638330.png
Adil Khan
1 year ago
movies recommendation using machine learning

To build a fully functional recommendation system, we need 3 components working together....

1675638330.png
Adil Khan
1 year ago
Accident prevention detection and reporting system

In today's world there is a huge increase in usage of cars. The use of such heavy vehicles...

1675638330.png
Adil Khan
1 year ago
Lawyer client application

Currently we don?t have any platform to find lawyers directly, so whenever someone need an...

1675638330.png
Adil Khan
1 year ago